What does check AquaPure general fault mean?
What does check AquaPure general fault mean?
Posted July 14, 2009. The unit is reporting that your Chlorine generator has a problem and needs your attention. You will need to go out to the pool equipment and wait for the Aqua Pure to display a 3 digit code, This code will direct you to the problem.
What does cell reversing mean on AquaPure?
AquaPure automatically cleans the Cell electrodes once every 3 hours by reversing polarity. This does not interrupt the production of Chlorine.
How do you clean a salt cell sensor?
Turn the flow/temp/salinity sensor counterclockwise to remove it from the three-port cell. Clean the sensor contacts gently with a household cleaning pad. Rinse well with water. This should be done yearly.
Why does AquaPure say no flow?
I would like to remind everyone that if your AquaPure system is showing “No Flow”, with or without any other error codes, your system IS NOT making chlorine. Don’t ignore it.
How do you read a Jandy serial number?
The serial# is on a white tag on the bottom of the power supply. For example, serial number CM3 01 06 13 86 can be read as follows: CM3 means it is a ClorMatic III, 01 is the year, 06 is the month, 13 is the day and 86 is the unit manufactured that day.
How do you reset AquaLink Runescape?
How do I Reset a Jandy AquaLink System?
- Press the “Menu” button.
- Scroll to and highlight “System Setup” using the arrow keys. Press “Enter.”
- Scroll to highlight “Clear Memory,” then press “Enter.” You have now reset your AquaLink system.
How long does a Jandy salt cell last?
about five to seven years
The safe answer is that they usually last for about five to seven years. Salt Cells cost between $200 and $900 to replace, depending on your chlorinator model.
Why is my salt generator not producing chlorine?
The saltwater chlorinator needs a sufficient flow of water for effective operation. A dirty skimmer basket, clogged or dirty filter, and a clogged pump strainer, can cause insufficient water flow for the chlorinator to produce less chlorine.
Is Jandy and Zodiac the same company?
Zodiac Pool Systems, Inc., a subsidiary of Zodiac Marine & Pool, S.A.S., is a global leader in swimming pool and spa products and services. The company’s comprehensive product lines are marketed under the leading brand names of Zodiac®, Polaris®, Jandy Pro Series®, Baracuda®, Nature2®, and Cover-Pools®.
How do you recalibrate Jandy salt?
Press and hold the ‘Pool Temperature’ (‘D’) key for 15 seconds. The system will beep when the button is pushed, it will beep again after 10 seconds, and again after 15 seconds. Release the key after the third beep.
Why wont my AquaLink connect?
If the process fails, the iAquaLink device will need to have its memory cleared by physically toggling the WiFi-Wired switch to Wired then back to WiFi. This will restart setup mode so you may attempt to connect it to your eero network again.
What does Aqualink Rs do on Jandy aquapure?
AquaLink RS is controlling the AquaPure and desired output percentages. AquaLink RS is controlling the AquaPure and “Boost” is active. If you need more help understanding the AquaPure Error Codes, or need help fixing the issue, stop by a local Leslie’s Pool Supplies store and speak with a trained pool professional today.
What is the low voltage code on Jandy aquapure?
(Generates 173 – Low input voltage code if Level 2 code 188 is present) (Generates 170 code if 188 is not present) Contact a pool professional. VAC input voltage is too low. (Generates 173 code if Level II code 187 is present)
What does ja and JB mean on aquapure?
•‘JA’ –Indicates operation is controlled by a Jandy AquaLink RS or PDA, and system is in AUTO MODE. •‘JO’ –Indicates operation is controlled by a Jandy AquaLink RS or PDA, and system is in SERVICE or TIME MODE. •‘JB’ –Indicates operation is controlled by a Jandy AquaLink RS or PDA, and system is in BOOST MODE.
Where do I find the service code on my aquapure?
A service code is a three digit number that appears on the display panel of an AquaPure Control Box, letting you know if your AquaPure unit is experiencing any problems. Service codes are fast, easy to read, and not only identify the problem, but direct you to an available solution.