What is so special about a Dana 44?
What is so special about a Dana 44?
The Dana 44 has a GAWR up to 3,500 lb (1,600 kg) and is a semi-floating type, having one bearing on the end of the axle shaft which carries the weight of the vehicle on the axle and also allows axle rotation. There is an 8.9″ diameter Dana 44 ring and pinion that is very different from the standard Dana 44.
Can a Dana 44 handle 38s?
So YES a BUILT 44 will hang tough with 37″-38″ tires for a while at least.
How do you tell if I have a Dana 44?
Many Dana axles have the model ID cast into the fins or centersection. Look for a “44” or “60” cast into the reinforcement ribs. The number can usually be found on the lower right side rib below the differential cover, but it may also be found on other ribs or on top of the main cast structure.
What’s the difference between Cherokee XJ and Dana 44?
Larger width differences (full-size truck axles) are prepared by disassembling, shortening, and rewelding the axle tubes to the differential housing. Dana 44s are available from Scouts and the full-size (Grand) Wagoneers, although the wheel lug patterns are not the same as the XJ.
Can a Dana 44 axle be used on a Jeep Scout?
The Dana 44 axle is an extremely popular upgrade for small to mid-sized Jeeps and other 4x4s. Did you know, however, that all Dana 44 rear axles are not the same? The Dana 44 has been used in lots of vehicles, including Jeep, Dodge, Scout and Isuzu, so naturally there are differences in various axles you’ll find.
How big is the axle on a XJ Dana 35?
The XJ Dana 35 axle measures 2.64″ in diameter, necking down quite a bit to 2.48″ at the diff. The axle tubes on my Dana 44 have been welded to the center casting… a good idea on the Dana 35, but overkill here.
Which is Dana 44 bolt in axle assembly?
The Dana 44 Complete Bolt in Axle Assembly is a perfect upgrade for the hardcore off road enthusiast. Don’t waste money on your Dana 35 only to find out you need to upgrade again.