What happened Robar gun?
What happened Robar gun?
Robar, renowned for their self-lubricating NP3 finishes and which has been in business for more than 35 years, is officially closing their doors. The ROBAR Companies, Inc. Phone: (623) 581-2648. Robar was very popular back in the day before Cerakote became the standard for aftermarket gun finishes.
What is NP3+ coating?
NP3+ is a satin gray, non-reflective color ideal for all firearms. NP3+ can be plated to all internal parts giving a smoothness to the action not found with any other coating. NP3+ is guaranteed against corrosion, peeling or flaking for the lifetime of the firearm.
What is Robar NP3?
NP3 is an Electroless Nickel/PTFE coating that combines sub-micron particles of Teflon with Electroless Nickel. Skipping all of the technical jargon, the simplest explanation is that it is a dry lubricated, low friction surface that is extremely hard and resistant to wear.
Is NP3 coating durable?
NP3 is very corrosion resistant, a 1 mil (. 001) coating exceeding a 250 hour salt spray test. NP3 has a high lubricity and low friction co-efficient; the life expectancy of parts will be greatly increased due to reduced friction wear. NP3 is guaranteed against corrosion, peeling and flaking.
What does NP3 mean?
NP3 is a surface treatment for various metals and alloys that combines sub-micron particles of PTFE (Polytetraflouro-ethylene) with autocatalytically applied nickel/phosphorus. The result is an accurately applied, dry lubricated, low friction surface that is extremely hard and resistant to wear.
Why did Glock stop using Tenifer?
The reason is Glock had the slides treated with the Tennifer process in Europe, then had the pistols sent to Georgia, and assembled. The EPA is a government agency, if they banned something there has to be documentation of that ban.
How good is Melonite coating?
Unlike some other finishes and treatments, Melonite® has a predictable and consistent outcome that significantly strengthens the surfaces of carbon steel, stainless steel, alloy steel, and austenitic steel products. It can also be highly effective when used for cast iron and sintered iron, as well.
Does Glock still use Tenifer?
Glock Ges. m.b.H., an Austrian firearms manufacturer, utilized the Tenifer process until 2010, to protect the barrels and slides of the pistols they manufacture. The finish on a Glock pistol is the third and final hardening process. In 2010 Glock switched to a gaseous ferritic nitrocarburizing process.
Is Melonite the same as nitride?
Faxon typically uses the terms “nitride” and “QPQ” to refer to how our barrels are processed. “Melonite,” “Isonite,” etc are all branding terms for various similar nitride processes. Typically, these will each have a small tweak compared to the other, but they are largely the same in terms of performance.
Is QPQ a coating?
Quench Polish Quench or QPQ coating is a sophisticated heat treatment for ferrous metals such as steels and iron. The main idea to use the QPQ process is to achieve very high corrosion resistance and lubricity. This makes it ideal for many different applications.
Is the gun finishing company Robar out of business?
A gun-finishing pioneer closes its doors. Robar, renowned for their self-lubricating NP3 finishes and which has been in business for more than 35 years, is officially closing their doors. Customers have received the following email: Today is the last day that we will be in business.
When did Robar self lubricating finish go out of business?
Robar, renowned for their self-lubricating NP3 finishes and which has been in business for more than 35 years, is officially closing their doors. Customers have received the following email:
What kind of finish is Robar Np3 gun?
Robar’s NP3 was one of the earliest self-lubricating, proprietary finishes on firearms that were favored by law enforcement and civilians alike. Unlike Cerakote which certifies and trains gunsmiths to perform the process, customers had to send their guns to Robar in Arizona to get the work done.
What kind of plating does Robar Gunsmiths use?
Robar became a full-time enterprise as a gunsmithing shop in 1986. Shortly thereafter, Barrkman bought the exclusive license to offer NP3 plating. NP3 is an Electroless Nickel/PTFE coating that combines sub-micron particles of Teflon with Electroless Nickel.