Where are flex-a-lite fans made?
Where are flex-a-lite fans made?
the USA
Flex-a-lite designs, develops and manufactures in the USA, including: Electric-Cooling Fans, Belt-Driven Fans, Oil & Transmission Coolers and more.
Who owns Flex-a-lite?
Legend Brands, Inc.
Flex-A-Lite is a division of Legend Brands, Inc.
How many CFM do I need to cool my engine?
As a general rule of thumb, follow these minimum cubic feet per minute (cfm) ratings when using an electric fan as the primary cooling source on a basic engine: 1,250 cfm for a 4-cylinder. 2,000 cfm for a 6-cylinder. 2,500 cfm for a 8-cylinder.
What is the difference between a flex fan and a clutch fan?
The flex fan is proportional to engine speed however high that may be even when flexed. The clutch fan also never fatigues. A flex fan can only flex so many times before the blades become brittle and crack.
Where are be cool radiators made?
THE USA
Located in Michigan, Be Cool is proud to say all of its radiators are MADE IN THE USA.
How much CFM do I need for a 350?
A 600-cfm carburetor may perform quite well on a stock 350 Chevy. However, the minute you start weaving in power adders like a hotter cam, a dual-plane performance intake manifold, and aluminum heads you’re going to need 700-750 cfm.
How many CFM do I need to cool a v8?
CFM Rating
| Engine Size | Minimum Fan CFM |
|---|---|
| 4 cylinder | 1,250 cfm |
| 6 cylinder | 2,000 cfm |
| Small 8 cylinder (under 302 c.i.d.) | 2,500 cfm |
| Large 8 cylinder (302 c.i.d. +) | 2,800 cfm + |
Is a flex fan worth it?
For high rpm use, flex fans are considered an upgrade over clutch fans. They can be a good choice for modified vehicles turning 6,000 – 8,000 rpm. Advantages include: They move more air for better cooling.
Do electric fans add horsepower?
In contrast, the use of electric fans allow for fan reversal, which keep the heat exchangers clean while cooling with much lower power needed than the mechanical fan. In a normal pickup situation, even in high ambient temperatures, the electric fan system will only draw a maximum of about 5 horsepower from the engine.
Are aluminum radiators better than brass?
An aluminum radiator does cool better than a copper brass radiator. For example, an aluminum radiator with 2 rows of 1″ tubes is equivalent to a copper brass radiator with 5 rows of 1/2″ tubes. Aluminum provides high efficiency, is lightweight, and has a longer life compared to copper brass.
When was the first flex a Lite fan made?
Flex-A-Lite. The brand name “Flex-A-Lite” serves, the passenger car, or automotive aftermarket, with belt-driven engine cooling fans, electric fans, transmission and engine oil coolers. Flex-A-Lite designed the first plastic Heavy Duty truck fans in 1968 for Class VI & VIII trucks, and produced the first one-piece plastic truck fan in 1977,…
Which is better electric fan or flex a Lite?
Even though an electric fan may have the same or only a slightly higher cfm rating, the ability of a fully shrouded electric fan to pull heat out of a radiator is much higher. We tested a Flex-a-lite 16-inch fan assembly (Part #396) and the same fan assembly in a fully shrouded assembly (Part #180) and found 40-percent more heat dissipation!
What does the name Flex a Lite stand for?
The brand name “Flex-A-Lite” serves, the passenger car, or automotive aftermarket, with belt-driven engine cooling fans, electric fans, transmission and engine oil coolers.
What kind of transmission cooler does Flex a Lite use?
Flex-A-Lite® has taken the guesswork out of selecting and mounting the right transmission cooler for your 2003-2009 Dodge Ram 2500…