What is Show ip OSPF interface brief?
What is Show ip OSPF interface brief?
The show ip ospf interface [type number | brief] command can be used to display which interfaces are enabled into the OSPF process. The show ip ospf neighbor [type number] command can be used to display any OSPF neighborships. The show ip ospf database command can be used to display the OSPF LSDB.
What does the show ip OSPF database command reveal?
The show ip ospf database command displays the content of the LSDB and verifies information about specific LSAs. The output reveals the presence of different LSA types. For each LSA type, you can see which router advertised it, the age of the LSA, and the value of the link ID.
What does clear IP OSPF process?
Globally resets (disables then re-enables) OSPF without deleting the OSPF configuration information. neighbor. Clears the specified neighbor, or clears all neighbors. A.B.C.D. Specifies the IP address of the neighbor to clear.
How to show OSPF interface brief on Cisco router?
Show IP OSPF Interface Brief Command on CISCO Router/Switch 1 Command 2 Use. This command gives a brief summary of what interface is currently configured with ospf on the router, as well as the ip address and subnet mask of that interface. 3 Syntax 4 Example. Here is the output of show ip interface brief on R3.
When to use the show ip OSPF command?
BFD has been enabled on the OSPF process. The following is an excerpt of output from the show ip ospf command when the OSPF Forwarding Address Suppression in Type-5 LSAs feature is configured: Router# show ip ospf . . .
What is the process ID of OSPF interface?
The process ID is the ID of the OSPF process to which the interface belongs. The process ID is local to the router, and two OSPF neighboring routers can have different OSPF process IDs.
How is the OSPF priority determined for a router?
This is the OSPF priority that helps determine the DR and BDR on the network to which this interface is connected. Priority is an 8-bit field based on which DRs and BDRs are elected. The router with the highest priority becomes the DR. If the priorities are the same, the router with the highest router ID becomes the DR.