What does P1233 code mean?
What does P1233 code mean?
Error Code P1233 is defined as Fuel Pump Driver Module Disabled Or Off Line. This means the fuel pump is not starting up correctly, which could be caused by problems with the FPDM (fuel pump driver module).
What does a Fpdm do?
The fuel pump drive — or driver — module is usually referred to by the acronym FPDM. By controlling the voltage, the fuel-pump driver module maintains the optimum fuel pressure and fuel delivery to the engine throughout its full operating range.
Where is the fuel pump driver module located on a 2002 Ford Explorer?
The fuel pump driver module is located under the truck near the fuel tank.
How do I know if my fuel pump module is bad?
Usually a bad or failing fuel pump relay will produce a few symptoms that can alert the driver of the issues.
- Engine stalls. One of the first symptoms of an issue with the fuel pump relay is an engine that suddenly stalls.
- Engine does not start.
- No noise from the fuel pump.
Where is the computer module located on a 2004 Ford Explorer?
The location of it in the 2004 Explorer is behind the dashboard to the left of the radio. You will need to remove the radio to access it.
Where is the fuel pump driver module on a 2005 Ford Escape?
On the 2005 Ford Escape the fuel pump driver module can be found in the rear of the vehicle. It is located behind the panel on the right side of the cargo compartment at the back of the SUV. The fuel pump driver module is what controls the fuel pump and keeps everything working in the fuel system.
What does it mean when your fuel pump says p1233?
Definition. Error Code P1233 is set when the fuel pump is not starting up correctly. This could be caused by two primary reasons that interfere with fuel pump startup – the fuel pump relay, or the inertia switch.
How much does it cost to repair a p1233 Ford engine?
The cost of diagnosing the P1233 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. P1233 FORD Possible Symptoms Engine Light ON (or Service Engine Soon Warning Light) Engine no start
What does the p1233 Ford powertrain control module do?
P1233 Ford Meaning. The Powertrain Control Module (PCM) monitors the Fuel Pump Monitor (FPM) circuit from the Fuel Pump Driver Module (FPDM). With the key on, the FPDM continuously sends a duty cycle signal to the PCM through the FPM circuit.
What to do if you get a p1233 code?
Start by checking the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost to diagnose the P1233 code is 1.0 hour of labor.