Where is the keyless entry code on a 2010 Mercury Mariner?
Where is the keyless entry code on a 2010 Mercury Mariner?
On Ford Explorers and Mercury Mountaineers from 2006 until the model year 2010, the default five-digit keypad code is printed on the smart junction box (SJB) under the driver’s side of the dash.
Where is the 5 digit factory set code?
You can operate the keypad with the factory-set five-digit entry code. The code is on the owner’s wallet card in the glove box and is available from an authorized dealer.
Where can I find the factory code Ford?
Find and remove the panel covering the RAP. Using a flashlight, locate the removable panel and turn two thumb screws counterclockwise to remove the plastic panel. Shine the flashlight onto the RAP module and look for the label containing the 5 digit factory code.
How do you reset the door code on a Mercury Mariner?
How to Program a Keyless Entry Pad on a Mercury Mariner
- Enter the five-digit code programmed into the keypad from the factory. Find the key code in the card stored in the glove box of your Mariner.
- Press the “1-2” button on the keypad immediately after inputting the factory code.
What is the keyless code on a Mercury Mountaineer?
Many Ford Explorers and Mercury Mountaineers were manufactured with an option known as the Ford keyless entry keypad. Some models refer to it as SecuriCode as well.
Where is the 5 digit keyless code on a Ford Explorer?
To find the 5-digit default keyless code on a Ford Explorer or Mercury Mountaineer, start by locating the panel that’s covering the remote anti-theft personality (RAP) module, which should be located toward the back left of your vehicle. Then, turn the screws on the panel counterclockwise to remove the panel.
How do you program keyless entry on MyFord Touch?
Get inside your vehicle. The MyFord Touch system can program your keyless entry code using the screen from within your vehicle. Make sure all the doors are closed before programming. Hit the Menu button. At the top of your vehicle’s Home Screen, hit the menu button to begin programming your new code. Hit the Vehicle button.
Where is the SecuriCode button on a Ford Explorer?
Newer Ford Explorers may use a touchscreen display system known as MyFord Touch. It controls comfort and convenience systems including SecuriCode. Step 1: Press the “Menu” button. With the ignition on and the doors closed, press the “Menu” button at the top of the screen. Step 2: Press the “Vehicle” button.