Should you remove copper fouling?
Should you remove copper fouling?
Copper, smeared on steel, can corrode the steel if there’s moisture present. Very often, a copper-fouled barrel will shoot OK until it’s cleaned, and then it won’t shoot worth a damn. The copper has covered up the pits, and when it’s removed, the bore looks like the surface of the moon.
Will Windex remove copper fouling?
Windex has ammonia, which will remove copper fouling. On an old gun with a pitted barrel, limited copper fouling will actually smooth out the pits and make a barrel shoot better. Water is all you need to remove corrosive salts from old ammo.
Does Hoppes elite remove copper?
Hoppe’s Elite Copper Terminator quickly dissolves welded copper fouling from bore steel. This formula can be used alone or as a powerful systems approach with Hoppe’s Elite Gun Cleaner by removing layers of carbon build up allowing for more rapid copper removal.
Is copper fouling normal?
So there you are with a bore that’s free of powder residue and a sickly smile on your face, and it’s time to get down to the real villain, which is copper residue. Powder fouling is unattractive, but pretty much harmless.
How does copper fouling happen?
Copper fouling is when streaks of copper are left on your bore. This affects accuracy in two ways. The first of which is it mechanically changes the dimensions of the bore a tiny bit. The second is that it changes the coefficient of friction between the bullet and the bore between shots as more copper builds up.
What is the best bore cleaner?
Hoppe’s No. 9 Gun Cleaner.
Will CLP remove copper?
CLP is a good general purpose cleaner and does a great job of cleaning carbon deposits and light copper fouling.
What to use to clean copper fouling field?
Each barrel requires different treatment. When you pull the patch out, it will probably be black, with pitch-black streaks where it was contacting the lands. At this point, get all the J-B out with powder solvent and leave the bore wet for a couple of hours. Put another wet patch through and see if it’s green or blue.
Which is the best solvent for copper removal?
Hoppes #9 Benchrest is a good general use bore solvent with excellent copper removing qualities. Unlike more aggressive ammonia based solvents, it can be left in the bore over night.author photo Wet a few patches with Kroil, saturate the bore, and let it soak for a while.
What to use to clean a copper patch on a rifle?
A patch exhibiting copper fouling. The bottom line in cleaning the bore of any rifle is that you must continue until you can use a copper removing solvent and the patch will come out without any blue stains. author photo If you want to speed up the process here, use a brush.
What kind of solvent can I use to clean my gun bore?
However, it will not damage the bore. Hoppes #9 Benchrest is a good general use bore solvent with excellent copper removing qualities. Unlike more aggressive ammonia based solvents, it can be left in the bore over night. author photo