What is A500 steel used for?
What is A500 steel used for?
In most cases, A500 material is used for the welded, riveted, or bolted construction of bridges or buildings, and for general structural purposes.
How strong is A500 steel?
Tensile requirements
| Round structural tubing | ||
|---|---|---|
| Grade A | Grade B | |
| Tensile strength, min, psi (MPa) | 45,000 (310) | 58,000 (400) |
| Yield strength, min, psi, (MPa) | 33,000 (230) | 42,000 (290) |
| Elongation in 2 in. (50 mm), min, %D | 25A | 23B |
What type of steel is A500?
carbon steel tubing
ASTM A500 (Also known as A-500) carbon steel tubing is a standard specification for cold-formed welded and seamless carbon steel structural tubing in round, square and rectangular shapes. ASTM A500 is the most common specification in North America for Hollow Structural Sections (HSS).
Is A500 seamless?
ASTM A500 is a standard specification published by the ASTM for cold-formed welded and seamless carbon steel structural tubing in round, square, and rectangular shapes. It is commonly specified in the US for hollow structural sections, but the more stringent CSA G40.
Which is better A500 or A53 steel pipe?
But the lacquer coating that usually comes on A53 grade pipe makes the pipe harder to fabricate and paint. A500 pipe is normally better for the majority of your structural steel construction projects because it has a higher yield strength than the A53 type pipe specification.
Which is better A500 or A53 grade B?
The specified yield strength of A53 Grade B is 35 ksi. That’s over a 30% increase in yield strength. Therefore, A500 round HSS have greater strength-to-weight ratios than A53 pipes. So, with round HSS you need less steel, by weight, to do the job—less weight equals less cost.
What’s the yield strength of an ASTM A53 pipe?
The specified yield strength of A500 Grade C (the most commonly available grade) is 46 ksi. The specified yield strength of A53 Grade B is 35 ksi. That’s over a 30% increase in yield strength.
Can A53 SCH 80 pipe be used for pressure?
Our A53 sch 80 Steel Pipe is a tested pipe that can be used for structural or pressure applications and may have a black coated finish. It is critical that structural grades of carbon steel pipe not be used for pressure or fluid applications. Specifications: ASTM A500 Grade B; A106; A252, ASTM A53 Gr B, Type E, Tested