What does used mean on Rainbird?
What does used mean on Rainbird?
˜ The display shows the program, the station number, and the currently set watering time. If the station has been included in another program, “USED” appears in the display. NOTE: If “USED” appears, you can still set a watering time for the station unless the station has been previously assigned to the D-drip program.
How do I reset my Rainbird ESP Modular Controller?
The current date and time will not be affected.
- Turn the dial to Seasonal Adjust.
- Press and hold the left and right arrow buttons at the same time for at least 3 seconds. Until you see the word “CLEARED” on the screen.
- Turn the dial back to AUTO RUN. Your ESP-Me is now restored to the factory default settings.
How do you program a Rainbird?
How to Reprogram Rainbird
- Check the time and date on the controller to make sure it is accurate.
- Rotate the dial to the “Watering start time” position and press the “+” or “-” keys to reprogram the time of day the watering cycle begins.
- Turn the dial to the “Days to water” position.
How do you clear the alarm on Rainbird ESP?
The status light on the module of the shorted station will blink continuously. Remove the shorted station wire from the module. In the Auto dial position select Alarm and Clear.
How do you reset Rainbird ESP 6tm?
Try disconnecting the power and the back up battery, then press and hold the manual start / advance button for about 10 seconds to dissipate any residual power in the controller. Reconnect the power again to see if this has reset the controller.
How does the Rain Bird ESP 12-lx plus work?
The Rain Bird ESP 12-LX Plus is a modular programmable irrigation controller capable of controlling up to 12 sprinkler valves at a time. Use the “+” and “-” keys to select a start time. Press “Next” and use the “+” and “-” keys to enter up to seven additional start times per program.
How many stations are in a rain bird controller?
The popular Rain Bird® ESP-LX Series commercial controllers have been enhanced to provide additional features and station capacity. The ESP-LXME Enhanced Controller offers flow sensing and management with modular station capacity from 8 to 48 stations. Station modules are available in 8- and 12-station models.
When did Rain Bird come out with the LCD?
The dial, switches and buttons interface which Rain Bird first introduced in the 1980s is easy to learn and use and has become a standard controller interface for the irrigation industry. The large LCD display incorporates softkey text labels for the button functions rather than dedicated buttons.
Can a rain sensor be added to an ESP-me?
Best of all, you can upgrade existing ESP-Me installations by simply installing a new WiFi-compatible front panel and LNK™ WiFi Module, without having to replace the entire unit. Make your controller SMART with EPA WaterSense certification by adding the LNK WiFi module and a WR2 rain sensor.