What is the AUX button on Viper remote?
What is the AUX button on Viper remote?
Press and release the “AUX” button to operate in “Silent Mode.” This stops the horn from sounding and the lights flashing to confirm activation of the alarm.
What does the AUX button do?
Instead of routing the output from your external audio source through the stereo’s cassette player and then having the stereo play the cassette, the “AUX” port routes the signal directly into the car stereo for a cleaner connection.
What is the CD AUX button?
by Jule Pamplin. Thomas Northcut/Photodisc/Getty Images. Adding an AUX input to your vehicle’s CD player will open your stereo system up to many possible connections. You can use an AUX input to connect an MP3 player or satellite radio receiver to your vehicle without needing a head unit that has the ability built in.
Why is my AUX not working in my car?
Check to see if the AUX cord is firmly connected to both devices. If this does not work and are only two rings, your cord is not compatible. If there are three rings, replace the auxiliary cord. If this does not work, the problem may be with the auxiliary cord jack and you may need to replace it.
Why is my Viper remote start not working?
If the procedure mentioned above does not work simply turn the key off then back on and press the valet switch two times. If this does not work turn the key off then back on and try it three times. Continue this up to five and one of them should disarm the alarm.
How do I use my old Viper remote start?
Viper Support Center
- Park your vehicle and put the gear shift into neutral.
- Apply the emergency brake and release the foot brake.
- Activate remote start while the car is running off the key.
- After a few seconds have passed, remove the key from the cylinder and the car will continue to run.
- Exit the vehicle.
How can I put aux in my car without aux?
FM Transmitter — Under $20 An FM transmitter plugs into your cigarette lighter socket and connects to your device via an aux cord or Bluetooth. The transmitter broadcasts what’s playing from your phone over a short FM frequency to which you tune your car’s radio and receive.
How do I get my aux cord to work?
Locate the Aux Input socket on your car stereo or dashboard. Plug one end of audio cable into the headphone socket of your smartphone. Plug the other end of the cable into the car stereo Aux Input socket. Set the car stereo source to AUX Input.
Why does the AUX not work on my Iphone?
Restart your iOS device and your car. Connect your iOS device to a different stereo USB port (if you have one). Try a different Lightning to USB cable. Update your iOS device.
How do I reprogram my Viper remote start?
To program your remote please do the following:
- Open the driver door.
- Press and hold the “F” button on the remote for 8 seconds or until the orange LED lights up solid at the top.
- Once the orange LED lights up solid, let go of the “F” button and press the remote start button until you hear 3 beeps from the remote.