Is Vivotek a Chinese company?
Is Vivotek a Chinese company?
(Taiwan, China) VIVOTEK INC., established in Taiwan in 2000, has quickly grown into a prestigious leading manufacturer in the network video surveillance industry.
What is a Vivotek device?
Smart Management Tool. Device Center is an all-in-one management tool that facilitates the configuration of multiple counting cameras across different sites. It is especially valuable for projects involving multiple counting cameras with the same settings and for counting result analysis.
Where is Vivotek made?
Taiwan
Founded in Taiwan in 2000, Vivotek has established itself as a leading manufacturer in the network IP video surveillance industry.
Are Vivotek camera ONVIF?
The current firmware of Vivotek cameras does not support dedicated ONVIF user rights. The IT manager must ensure the appropriate security measures for unauthorized access to these cameras in the network to compensate for this limitation of Vivotek.
What is the default IP address for Vivotek camera?
192.168.0.3
In this case, if the Local Area Network (LAN) IP address of your Network Camera is 192.168. 0.3, please forward the following ports for the Network Camera on the router. If you have changed the port numbers on the Network page, please open the ports accordingly on your router.
What is the default password for Vivotek IP cameras?
The camera restarts and load the default settings. The default username and password for Vivotek cameras are admin/123456 for some models and the username is root with an empty password.
Is vivotek NDAA compliant?
VIVOTEK Statement The following VIVOTEK cameras and network video recorders (NVRs), which do not use or deploy critical components including SoCs produced by NDAA banned component vendors, are compliant with the NDAA.
How do I make my Vivotek camera default?
Reset: Press and release the recessed reset button with a straightened paper clip. Wait for the Network Camera to reboot. Restore: Press and hold the recessed reset button until the status LED rapidly blinks red and green simultaneously. Note that all settings will be restored to factory default.
What is IP camera activation password?
In earlier versions of the firmware (to version 5.3. 0) IP cameras HIKVISION supplied to IP address 192.0. 0.64 and the default password is 12345. 0 and above before connecting to the network need to “activate” because they come from the factory without password (not active).
How do I find my IP camera password?
If you forget the password, the only way is to reset the IP Camera to factory default setting via hardware reset button. To reset the IP Camera via the hardware reset button, please press and hold the reset button for more than 10 seconds and then all the settings will go to the default settings.
What is NDAA compliance?
NDAA (the National Defense Authorization Act) is a set of federal laws passed every year by the US government to determine what the annual budget is for the US Department of Defense.