How do I pull codes from OBD1?
How do I pull codes from OBD1?
To get the check engine codes to flash in your dash panel, use a jumper wire or a paper clip and connect terminals A and B of the diagnostic connector. Turn your ignition key on with engine off and the codes should start to blink. All codes should start with code 12 which is one long flash followed by 2 short flashes.
What are the OBD1 codes?
GM OBD I Trouble Code Chart
| Code | Description |
|---|---|
| Code 13 | Oxygen sensor circuit open or no activity |
| Code 14 | Engine coolant temp sensor error (high temp indicated) |
| Code 15 | Engine coolant temp sensor error (low temp indicated) |
| Code 16 | System voltage too low |
Can AutoZone read OBD1?
We can help you get a reading yourself. Borrow an OBD reader to get a Check Engine Light reading with the AutoZone Free Fix Finder Service. It’s a simple task that takes less than two minutes.
What years does OBD1 cover?
OBD1 and OBD1 Scanners OBD1 is a diagnostic system that only supports cars made before 1996. Introduced in 1991, it does not support all older models. The downside of these scanners is that they are manufacturer specific. One scanner won’t work on two different brands even if they have the same issues.
Does AutoZone scan OBD1?
How many pins is OBD1?
12 Pins
OBD1 12 Pins to OBD2 16 Pins Adapter Cable Diagnosis OBD II Adapter Scanner Cable Connector for GM.
How do I clear OBD1 code GM?
After you think you’ve got to the root of your problem. It’s time to reset the code(s). Clear the codes by pulling the fuse for 15-30 seconds. FYI, it might just reset after you pull the fuse and put it back in.
Is a 95 accord OBD1?
OK! thanks all! you mean 94 and 95 4 cylinder accords are obd1 and all 96 and up accords are obd2. 95 v6 accords are also obd2.
Where can I get a free diagnostic test on my car?
But you may not realize you might be able to get that problem checked for free at AutoZone or your other local auto parts stores. Many drivers don’t realize that AutoZone, the nation’s largest auto parts chain, will do the following services free of charge: Read the codes on your check engine light.
