Q&A

How do I reset my Brother HL 5470DW printer?

How do I reset my Brother HL 5470DW printer?

Step 1: Turn on the Brother HL-5470DW. Step 2: Open the front cover of the printer by pressing the front cover release, then pulling the front cover forward. Step 3: Press and hold the green Go button for five seconds, until you see a message on the display that says Drum Clear.

Why is my Brother printer not printing from my computer?

The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as a result of wrong settings or configuration of the printer driver. Once you are able to print, enable your firewall again.

How do I reset my Brother printer drum?

Reset the Drum Counter

1. Close the front cover.
2. Make sure the machine is turned on.
3. Press. (Settings).
4. Press All Settings. (This step might be skipped in some models.)
5. Choose Machine Info. or Machine Information => Parts Life.
6. Press and hold Drum or Drum Life until the machine’s display message changes.
7. Press Yes.
8. Press.

How do I reset my brother 5450dn printer?

How do I reset my HL 5450dn?

1. Ensure the printer is turned off.
2. Open the printer front cover.
3. Hold the Go button while turning the printer on.
4. When the Toner, Drum, and Error LEDs are on and the Ready LED is off, release the GO button.
5. Press the Go button two (2) times.

How do I get my Brother printer out of error state?

You can do it in a few simple steps by unplugging the power cord from the wall outlet and then again switching it on. You can update or re-install the printer driver. According to many Brother Printer users, the Error State is often caused by the corrupting of the printer drivers. The technicians also suggest the same.

How do I fix my Brother printer it won’t print?

Here’re the fixes:

1. Check the connection.
2. Set your Brother printer as the default device.
3. Restart the Print Spooler service.
4. Update your printer driver.
5. Clear the print queue.
6. Print from other programs.
7. Factory reset your Brother printer.

What do I do if my Brother printer won’t print?

How do I get my Brother printer to recognize my new router?

Steps to Reset the WiFi Connection on Brother Printer

1. Firstly turn on your Brother printer.
2. Then press the Menu button on the control panel of the printers.
3. Now select Network and press Ok.
4. After that select Network Reset and press Ok.
5. Press Reset and then select Yes.

How do I reconnect my Brother printer to WiFi?

To set up your Brother machine on a wireless network:

1. Connect the power cord to your Brother machine and then connect it to an electrical socket.
2. Press Menu button on the machine’s control panel.
3. Press the Up or Down arrow key to select Network and press OK.
4. Press the Up or Down arrow key to select WLAN and press OK.