Contributing

How do I reset my ReadyNAS to factory settings?

How do I reset my ReadyNAS to factory settings?

How to Factory Reset Netgear ReadyNAS?

1. First of all, turn the ReadyNAS device off and locate the Reset button on it.
2. Take a hold of a paper clip or pin-like device.
3. Press and release the ReadyNAS Reset button using the pin.
4. Now, power up the device and again press the Reset button.
5. Let the lights on your device turn on.

How do I access the boot menu on my ReadyNAS Duo v2?

To access the boot menu, follow these steps:

1. Power off your storage system.
2. Using a straightened paper clip, press and hold the Reset button.
3. Press the Power button to power on the unit.
4. Continue to press the Reset button until the status display screen shows a boot menu message.

How do I reset my ReadyNAS admin password?

You can reset your ReadyNAS Admin password by accessing http://ip_address_of_readynas/password_recovery. If you have forgotten the password recovery answer, you will need to perform a firmware re-installation to reset the admin password.

How do I disable Netgear ReadyNAS Duo v2?

To gracefully shut down your system using the Power button: Press the Power button on the front panel of the system. The Power LED blinks, prompting you to confirm the shutdown.

How do you reset a Netgear NAS?

From the drop-down menu that displays, select one of the following options:

1. Shut down. Gracefully power down the system.
2. Restart. Gracefully power down the system and restart it.

What is Netgear ReadyNAS default password?

What are the factory default settings for my ReadyNAS OS 6 storage system?

Setting	Default
Admin user name (case-sensitive)	admin
Admin login password (case-sensitive)	password
Management
System configuration	ReadyNAS local admin page web-based configuration and status monitoring

How do I Reset my ReadyNAS 102?

Test disk.

1. Power off your storage system.
2. Using a straightened paper clip, press and hold the Reset button.
3. Press the Power button.
4. Continue to press the Reset button until the Power button LED, USB and backup status LED, disk 1 LED, and disk 2 LED light.
5. Release the Reset button.

How do I access my ReadyNAS admin page?

To access the local admin page:

1. Open a web browser and visit https://. is the name that you assigned to your ReadyNAS system or the default host name if you did not change it.
2. Accept the certificate. A login prompt displays.
3. Enter the login credentials for your system and click the OK button.

How do I disable Ready NAS?

Preferred Shutdown

1. Press the Power button. The Power LED blinks, prompting you to confirm the shutdown.
2. Press the Power button again. The system shuts down gracefully.

What is the default username and password for Netgear router?

When you buy a new NETGEAR router, it is configured with factory default settings. When you use the local web address www.routerlogin.com to access your router’s web interface, the user name is admin and the default password is password.

How do I Reset my Netgear router username and password?

To reset your router password:

1. In the address field of your browser type, www.routerlogin.net.
2. Click Cancel .
3. Enter the serial number of the router.
4. Click Continue .
5. Enter the saved answers to your security questions.
6. Click Continue .
7. Enter the new password and confirm.