How do I reset my Aqualisa digital shower?
How do I reset my Aqualisa digital shower?
It’s necessary to turn off the pump/unit for at least two to three hours in order to reset the Aqualisa Quartz Digital Shower. The power will not be reset if turned off and on quickly.
Why has my shower stopped working?
If you find the shower stops working completely, or indeed cuts off (very often when you have soap in your hair) this is the culprit. It’s usually the coil that breaks down. The coil (when working) lifts a plunger inside the solenoid valve and allows the water into the shower.
How do you turn on Aqualisa shower?
To activate the Q™ Controller, use the proximity sensor, or touch the power symbol until the screen wakes up. Then, push and release the QTM lever to start the shower. The Get Ready screen will appear on the display. After a moment the target temperature will flash until it is reached.
How long should an Aqualisa shower last?
The Best Aqualisa Thermostatic Mixer Shower Aqualisa assures its customers that this shower is durable and will not need to be changed for many years. Furthermore, this product has a 5-year warrantee on the valve and 2 years on the adjustable showerhead which also has 4 useful spray patterns.
How long is Aqualisa warranty?
a 1 year
Aqualisa products are covered by a 1 year guarantee period.
How do you get air out of Aqualisa shower?
There is a simple procedure you can try, using the shower to clear the air from the pipe work:
- Remove the shower head from the end of the flexible hose or fixed arm,
- Start the shower on the coldest setting,
- Slowly turn the temperature dial towards hot,
How does a shower pump switch on?
When the pump is fitted with a special negative head kit, the shower is operated by turning on the mixer valve and starting the pump by pushing the switch once. The pump will then run as normal and will automatically switch off when the shower is turned off.
Where is the fuse in an electric shower?
consumer unit
The shower circuit has only one fuse located in the consumer unit.
How do you remove Aqualisa shower control?
To remove the Cap on my Aqualisa mixer valve you just need to press firmly on the left hand end of the Aqualisa badge. This should displace it and reveal a screw under it. Remove the screw and just pull carefully on the cap.
Why does my Aqualisa shower keep going cold?
The things to check first are. 1 That the main valve coming into your house is fully open. 2 Then check that the valve on the line to the shower is fully open. The other possibility is a faulty flow/stabilizer valve not allowing the correct amount of water into the shower.
Where is Aqualisa made?
the UK
All Aqualisa Shower units are manufactured in the UK. Their shower range is designed and produced within their warehouse in Westerham, Kent.
What is the warranty on Aqualisa shower?
a 1 year guarantee
Aqualisa products are covered by a 1 year guarantee period. Please find the guarantee period below if you register your product: Please note that all non-domestic applications and non-registered products are covered by a 1 year guarantee period only.
Why is my Aqualisa quartz shower not working?
One of the most common reasons for a Aqualisa Quartz shower unit to suddenly stop working is an air lock in the system.
How does the Aqualisa smart shower system work?
The brains of the operation are in the form of a processor unit which is situated away from the shower enclosure, often in the loft. This technology gives you precise control over temperature and flow; our Aqualisa Smart Valve checks the water temperature 10 times every second to make sure the water is just right!
Why is my Aqualisa shower going hot and cold?
Aqualisa shower going hot/cold 1 That the main valve coming into your house is fully open. 2 Then check that the valve on the line to the shower is fully open. The other possibility is a faulty flow/stabilizer valve not allowing the correct amount of water into the shower.
What to do if your shower head is not working?
Check that the flexible hose to the shower head has not got a kink in it ( can be difficult to see if metal) and that the shower head is not part or completely blocked. Disconnect hose from control unit and blow throw it. You will soon be able to tell if it’s blocked/twisted.