How much does a Viking fridge weigh?
How much does a Viking fridge weigh?
Specs & Warranty
| Collection | Viking Professional 5 Series |
|---|---|
| Width | 48″ |
| Depth | 26.19″ |
| Height | 82.75″ |
| Weight | 580 lbs |
How many amps does a Viking refrigerator use?
Options
| General Specifications | |
|---|---|
| Type: | Built In |
| Frequency: | 60 Hz |
| Amps: | 15 A |
| Max Amp Usage: | 9.1 A |
Is it OK to transport a refrigerator laying down?
Can you lay a fridge or freezer down to move it? Fridges and freezers are best transported upright to keep the cooling refrigerant in its right place. With a lot of padding underneath, lie your fridge or upright freezer down and secure it with straps so it can’t move during transit.
Do Viking refrigerators have water dispensers?
The side-by-side refrigerator/freezer with ice and water dispenser provides the same professional performance, with the added convenience of cubed ice, crushed ice, and chilled water in easy one-handed operation. Viking introduced professional cooking to the home when their first range shipped in 1987.
How much does the door to a refrigerator weigh?
Average Refrigerator Weights: Charts From 55 Fridges
| Refrigerator Type | Number Reviewed | Average Weight (lbs) |
|---|---|---|
| French Door Fridges | 15 | 305lbs |
| Side by Side Fridges | 10 | 290lbs |
| Bottom Freezer Fridges | 10 | 214lbs |
| Top Freezer Fridges | 10 | 171lbs |
Does refrigerator need 20 amp outlet?
Refrigerator Circuit A modern refrigerator requires a dedicated 20-amp, 120/125-volt circuit. You may currently have a smaller refrigerator plugged into a general lighting circuit, but during any major remodeling, a dedicated 120/125-volt circuit for the refrigerator should be installed.
How many amps does a side by side refrigerator draw?
Refrigerator amps are the amount of electrical current it’s compressor uses to cool it’s compartment. Amperage for most household refrigerators, is anywhere from 3 to 5 if the voltage is 120. A 15 to 20 amp dedicated circuit is required because the in-rush amperage is much higher.