Popular articles

How do I use Buffalo LinkStation?

How do I use Buffalo LinkStation?

Knowledge Base

1. Connect the LinkStation to your network using the supplied Ethernet cable.
2. Plug in the AC adapter and connect to the LinkStation.
3. Power on the LinkStation by moving the switch on the rear of the unit to “On”.
4. Open NAS Navigator.
5. Right-click on the LinkStation and choose “Settings” from the pop-up menu.

How do you map a Buffalo LinkStation?

Mapping a Drive to a Buffalo NAS in Windows

1. Open NAS Navigator.
2. Right-click on the NAS.
3. Select “Browse Shares” from the pop-up menu.
4. Right-click on the shared folder you want to map to a drive letter.
5. Select “Map network drive…” from the pop-up menu.
6. Click on the drop-down menu to change the drive letter if desired.

How do I enable SMB2 on Buffalo NAS?

Before taking this step, make sure that SMB version 2 is enabled on the NAS.

1. Open the web interface click the configuration button next to “SMB”.
2. Note whether the SMB2 protocol is enabled. If it isn’t, click the “Edit” button.
3. Click the radio button to enable the SMB2 protocol and click the “OK” button.

What does WebAccess do on a Buffalo device?

WebAccess is a feature of many Buffalo devices that allows you to create a personal cloud for easy remote access and file sharing with anyone, anywhere over the Internet. Your data remains securely stored in one place on your home or small office network, but you can access it quickly from any computer or mobile device over the web.

How can I test access to buffalonas.com?

To test access go to BuffaloNAS.com from a computer outside your network and enter the name you assigned. You should be taken to the WebAccess interface for your TeraStation.

How do I set up WebAccess on my router?

1. Connect the Ethernet and power cables. Refer to your LinkStation’s or TeraStation’s user manual for more detail on setup. Note: WebAccess may not work if UPnP is disabled on your router. For best results, make sure that UPnP is enabled on your router before using WebAccess.

How do I disable buffalonas.com DNS service?

1. Open the user interface for the TeraStation. Click on the configuration icon next to WebAccess. Click Edit to configure the options. Note: Buffalonas.com is a DNS service provided by Buffalo. If you wish to use another DNS service select the option to disable buffalonas.com registration.