How do you connect high tensile wire?
How do you connect high tensile wire?
Tying Off
- Pull about 3 feet of wire around the post.
- Bring the end of the wire underneath and back over the line wire.
- Bring the end down between the post and the wire that you just wrapped around the post.
- Bring the tail under the wrap and over the line wire.
- Make two tight wraps with the tail around the line wire.
What gauge is high tensile wire?
12.5-gauge
The 12.5-gauge high-tensile smooth wire is an effective, dependable, low-cost electric fence wire for horses, cattle, livestock and pastures.
What is high tensile wire?
High tensile wire is made with higher carbon content at approximately 0.28%. The increased carbon content significantly increases the wire’s strength and reduces elongation minimizing the need for future tensioning and repair.
How tight should high tensile fence be?
– Over-tensioning hi-tensile wire: Hi-tensile wire needs only between 150 to 200 pounds of tension. If you are used to putting up barbed wire, then you would normally put about 300 to 350 pounds of tension on it. So, don’t over tension hi-tensile wire. This is normally the last step in putting up your fence.
How do you tension a wire?
How to Tighten Wire Strand Fencing
- Fold the wire fencing back over itself to create a loop that extends past the post.
- Twist the end of the wire together with the rest of the strand.
- Pull the loop around the post and fold it over the strand of wire.
- Push your bolt through the loop.
What does high tensile wire mean?
How long does high tensile wire last?
High tensile fence is an excellent choice to safely contain most species of livestock, including various exotic species. It is also equally effective keeping unwanted predators, deer or other wild animals out. High tensile is an affordable, low maintenance permanent perimeter fence, lasting up to 40 years.
What is high tensile wire used for?
High tensile wire is regarded as the most significant improvement in farm fencing since the introduction of barbed wire in 1874. While relatively new in the US, it has been used to effectively control cattle, sheep, and other livestock on ranches in other countries for over 50 years.
What materials are high tensile?
Materials with high tensile strength include steel, spider webs, bamboo, carbon fiber and graphene . Ultimate compressive strength and ultimate tensile strength are measures of when a material completely breaks under a compresive or tensile load respectively.
What is a high tension wire?
High tension leads or high tension cables or spark plug wires or spark plug cables are the wires that connect a distributor, ignition coil, or magneto to each of the spark plugs in some types of internal combustion engine. “High tension lead” or “cable” is also used for any electrical cable carrying a high voltage in any context.
What is smooth wire fencing?
As the name implies, the wire is smooth with no barbs present. Smooth wire used in combination with a fence charger is a common, inexpensive fencing option to contain horses and other animals prone to entanglement. Smooth wire is less likely to injure animals which become entangled or rub up against the wire.
https://www.youtube.com/watch?v=j3Y5SfLqQ4s