What qualifications do I need to be a PAT tester?
What qualifications do I need to be a PAT tester?
No specific qualifications are required, the regulations only require the testing to be done by a competent person. The definition of a competent person in the regulations is – “A person possessing sufficient technical knowledge or experience to be capable of ensuring that injury is prevented”.
Do you need to be trained to use a PAT tester?
As long as you’re deemed competent to do so, absolutely anyone can check electrical appliances for safety. The most commonly accepted way to be deemed competent is to take a PAT training course and be presented with a Certificate of Competency in PAT testing. Previous electrical training is not essential.
How can I pass Pat Testing exam?
Exam Tips:
- Work through the exam methodically and answer all questions.
- Take your time and read through each question carefully.
- If you are unsure of the answer, mark the question using the flag tool.
- Do not leave questions unanswered.
- Do not waste valuable time searching for every answer in the Code of Practice.
Is there money in PAT testing?
So Can I Make Any Money? Simple answer – yes you can! Whilst it is true that PAT testing is not the ‘licence to print money’ that it was in the 1990’s, there is still plenty of work out there if you are prepared to work hard.
Do you have to be an electrician to be a PAT tester?
The majority of electricians are qualified PAT testers, with many specialising in certain types of industry testing. However, you do not have to be an electrician to qualify as a PAT tester, meaning that anyone can train, learn and carry out PAT tests legally if they are capable.
Can you do PAT testing yourself?
You can PAT test without a qualification. Guidance say you have to be competent to test electrical equipment, not that you have to be qualified. The Portable Appliance Testing Trade Association say that you should undergo thorough training by a competent person in order to become competent yourself.
How long does a PAT test take?
about 1 hour
PAT testing usually takes about 1 hour to complete. In that time, an engineer will usually perform around 30 tests. To ensure everything runs smoothly, make sure appliances and equipment are easy for the engineer to access and that no walkways are obstructed.
Can you make money PAT testing?
Many businesses require tens, hundreds, or even thousands of appliances to be tested and so it won’t be long before those pounds start adding up. There are two clear solutions to falling prices in the PAT testing industry. All in all, it’s still possible to make good money from PAT testing.
What can I expect from a PAT testing course?
A full PAT test includes a visual inspection of the appliance and an in-depth check using specialised PAT testing equipment. This test checks earth continuity, lead polarity, and insulation resistance of the appliance. Some appliances only require a reduced test, known as a PAT insulation test.
Can you do pat testing yourself?
How often should I PAT test?
PAT testing should be carried out at least once a year. Devices that get tested will have the date of the test written on a label, and this can be used to check when the last test was and when the next test is scheduled for.
Can you make a living PAT testing?
Simple answer – yes you can! Whilst it is true that PAT testing is not the ‘licence to print money’ that it was in the 1990’s, there is still plenty of work out there if you are prepared to work hard. You need to put in some legwork to get the work, and once you have it, you have to do it properly.