Is the AMC 304 a good engine?
Is the AMC 304 a good engine?
ya, the 304 is a good engine, reliable. but old, less horsepower than the 258 straight six.
How much horsepower does a 304 v8 have?
210 hp
The 304 has a displacement of 304 cu in (5.0 L), which produced 210 hp (157 kW; 213 PS)(gross rating) in 1970-71 and was built starting in 1970.
How much horsepower does a AMC 360 have?
For instance the 1970 and 1971 360 with a two-barrel carburetor had 245 horsepower at 4,400 rpm and 365 pound feet of torque at 2,600 rpm, while 1972 and later versions had 175 horsepower at 4,000 rpm and 285 pound feet of torque at 2,400 rpm.
How much horsepower does a 401 AMC have?
The practical limit of the plebian AMC 401 is about 500 hp at 7,500 rpm. The main caps will begin to walk above that, so limit these engines tohealthy street mills if you want to keep the price down and use stockparts.
Who made engines for AMC?
American Motors Corporation
AMC V8 engine/Manufacturers
What killed AMC?
Chrysler president Bob Lutz went on to resurrect GM using business acumen gained from AMC, and Renault (partner of AMC from 1980-87), did the same with Nissan. In the end, AMC’s demise can be attributed to fighting against the ‘Big 3’, the Renault partnership, and simple bad timing.
Are AMC 360 engines good?
The AMC 360 is a very good motor actually. Super easy to work on. Performance parts are few and far between, so when you do find them, they can be expensive.
Is a AMC 360 a big block?
The Ford 360 is a big block engine. Chrysler has both big and small block engines too, and their 360 is a small block. AMC has no big or small block V-8 engines, whether 360, 390, 401, they’re all the same block and bored out differently to one specific size.
What was the fastest AMC car?
1 Hurst AMC Super Stock AMX: 4.9 Seconds This was an extreme version of the AMX 390 that ended up being the fastest AMC muscle car ever produced.
Did AMC use Chrysler engines?
In the 1970s, VAM (See Vehículos Automotores Mexicanos) introduced a 282-cubic-inch version of the engine. American Motors and Chrysler produced the basic design constantly through 2006 (AMC was bought out by Chrysler in late 1987).
Why did AMC fail?
Part of AMC’s downfall was their failed partnership with Renault. They also failed to get a rotary engine for the Pacer when GM canceled the program. In contrast to AMC’s failed partnerships, Subaru’s have been much more healthy and fruitful. AMC even had a partnership with Levis for a specially upholstered Gremlin.
When did the Jeep 304 V-8 get an ignition upgrade?
The Jeep 304 & 360 CID AMC V-8 from 1978 to 1990 are eligible for this upgrade. The 304 & 360 CID Engines from ’78 to ’90 used the same Motorcraft distributor for all variations.
How big is the engine in an AMC 304?
AMC 304 V8 Bore x Stroke 3.75″ x 3.44″ Displacement 304 (4.98L) Compression Ratio 8.4:1 Horsepower (net) 125@3200 Torque (net) 220@2400
Can you upgrade AMC 304 heads to 360?
Click to expand… Only with the correct casting number heads. all of the heads from the amc v-8’s from 1976 on will bolt on to any of the blocks from 76 on, but you have to be carefull.. not all of the 360 heads have the larger valves…..some are the same as the 304 heads. Most do though. all of the 401’s came with the larger heads
When did Jeep stop using the AMC 304 engine?
Early 304s performed well, so well that frame changes were made to the CJs in ’73 to prevent cracks. Meeting legal requirements for smog controls on the 304 severely hurt performance of the engine. The last two years of the 304 in the CJ were in ’80-’81.