How do I connect my PVR decoder with extra view?
How do I connect my PVR decoder with extra view?
First, connect the coaxial cable of each decoder to the smart LNB. If you have recent or newer decoder models then use the uni-cable ports on the smart LNB. Otherwise, if you have old decoder models then you can use the universal port. Remember Explora decoders use the uni-cable ports.
What is the difference between dual view and extra view?
What makes XtraView different from the Dual View system? Using the Dual View decoder subscribers were able to watch 2 different channels in 2 different rooms using a single decoder. This solution works off two separate decoders. The subscription model however remains the same.
How do you connect extra view?
When setting up an extra view connection, you can choose to use a wired or wireless connection. In the wired connection, you will need a coaxial cable connected to a Smart LNB. You should also check the type of cables your decoder supports to ensure the connection is done right.
How do I connect XtraView Explora and HD PVR?
You should first ensure you have a coaxial cable for both decoders and a Smart LNB device. The Explora is very convenient in this connection since it offers a range of connecting options. To make the connection, you can connect through the uni-cable ports on both decoders.
How does smart LNB connect to extra view?
Using a coaxial cable, connect all decoders and run them to the smart LNB. If the decoders in your extra view connection are new models, use the uni-cable port to connect to the smart LNB. Once connected, both decoders will begin receiving a signal, and you can proceed to the installation wizard.
Do you pay extra for extra view?
With XtraView, you can link either two or three decoders together under ONE subscription (and only pay a monthly Access Fee for the other decoders). If one of the decoders is a PVR, you are already paying an Access Fee, so don’t need to pay any more – this means that monthly viewing on your second decoder is FREE!
How do I connect two decoders to one dish?
What you need in how to connect two decoders to one satellite dish. You can either use a signal splitter on your satellite or install a twin LNB. It is just like the regular smart LNB but offers more ports to connect the RG6 cable. When using a signal splitter, you should connect it to the smart LNB on your satellite.
How do I connect my HD PVR?
Connect an RF cable to the RF OUT connector on the PVR and then to the TV Link. Connect the TV Link to the RF input on your TV. Refer to 3 on the illustration above. Connect the Audio/Video cable to the video and variable audio outputs of the PVR and then to the video and audio inputs on your TV.
How do I activate XtraView?
On your remote, click the “Help” button and scroll to the “General Information” option. Click on it and select the “Extra View” option. If your connection is correct and activated, it will be displayed here. This is the simple answer to how do I activate DStv extra view.
How many PVR decoders do you need for Xtraview?
For example, you can use two HD PVR 2PS with one Explora. You can’t use 3 4-Series decoders or HD PVR. Most DStv HD PVR from PVR 2P and newer support XtraView setup. No SD PVR DStv decoder support xtraview.
What kind of wiring diagram do I need for Xtraview?
XtraView is a cost effective and flexible solution allowing you to link two XtraView capable DStv. search results for Connection Diagram Dstv To Home hd pvr xtraview wiring diagram – wire, Wiring diagram hd pvr. wiring diagram.
How many PVR decoders can I use in one subscription?
The 3-decoder combination is not available and will not work with any of the older decoders. Hence if any older decoders are involved the maximum number under one subscription is 2. For example, you can use two HD PVR 2PS with one Explora. You can’t use 3 4-Series decoders or HD PVR.
Can a DStv be used as a PVR?
I have a DStv HDPVR in my lounge, this one to be exact: I have a 2×4 multiswitch with 2 cables coming in from the LNB on the dish and then 4 out to the PVR decoder. I want to add another TV at the back of the house which must be able to watch a DStv channel independently from the main PVR in the lounge. 1. Xtraview is what I’m looking for, correct?