How deep is the aquifer in Georgia?
How deep is the aquifer in Georgia?
The depth of the well is 624 feet below land surface.
Are there any aquifers in Georgia?
Groundwater Resources The surficial aquifer system is present in each of the five physiographic provinces in Georgia. Aquifers in the Coastal Plain include the surficial aquifer system, Brunswick aquifer system, Floridan aquifer system, Gordon aquifer, Claiborne aquifer, Clayton aquifer, and Cretaceous aquifer system.
What is the largest aquifer in Georgia?
Upper Floridan Aquifer
The Upper Floridan aquifer underlies most of the Coastal Plain of Georgia, southern South Carolina, extreme southeastern Alabama, and all of Florida (Miller, 1986). This aquifer is one of the most productive in the United States and a major source of water in the region.
Is it legal to drill your own well in Georgia?
Except as provided in subsection (f) of Code Section 12-5-127, no person shall drill a water well without first having a water well contractor’s license issued by the council.No person, including licensed water well contractors, shall drill any other kind of well, borehole, or corehole unless such person is acting …
How deep is the average well in Georgia?
There are two main types of household wells in Georgia. “Bored” wells are dug with an auger and are typically 24 to 30 inches in diameter and 10 to 30 feet deep. “Drilled” wells are much smaller in diameter and considerably deeper – usually 100 to 400 feet deep.
How do you find out how deep your well is?
Take up the slack and mark the string at ground level. Pull the weight out of the well. 3. Measure from the bottom of the weight to the ground level mark on your string. This is the depth of your well.
How deep is a well in Georgia?
between 200 to 800 feet deep
How deep should a well be? The typical water well in Northeast Georgia is between 200 to 800 feet deep. However, well depth is highly variable from site to site, and cannot be predicted before drilling the well.
How much does a deep well cost in Georgia?
Most residential wells, including the well pump and equipment, cost between $6,000 and $12,000. Municipal, agricultural and industrial water systems can cost much more. Do I need a permit for my well? Residential well permitting is required by some counties in Georgia.
Can you dig your own well in Georgia?
What are the aquifers in the coastal plain of Georgia?
Aquifers in the Coastal Plain include the surficial aquifer system, Brunswick aquifer system, Floridan aquifer system, Gordon aquifer, Claiborne aquifer, Clayton aquifer, and Cretaceous aquifer system.
How big is the aquifer system in Florida?
The Floridan aquifer system (FAS) covers an area of approximately 100,000 square miles in Florida and parts of Georgia, South Carolina, Alabama, and Mississippi. Groundwater wells for water supply were first drilled in the late 1800s and by the year 2000, the FAS was the primary source of drinking water for about 10 million people.
Where does the water in an aquifer come from?
An aquifer is an underground layer of rock or soil that contains water. The water is held in the spaces between the rock or soil particles.
How are artesian aquifers used for drinking water?
The pressure can often push water to the surface in a well drilled into an artesian aquifer; usually wells need a pump to bring water to the surface from the aquifer they are drilled into. We use aquifers as a source of drinking water and of water to irrigate crops or to use in industry, pumping water from the aquifer using a well.