What kind of oil does a John Deere L130 take?
What kind of oil does a John Deere L130 take?
The L130 lawn tractor’s factory specifications call for John Deere’s Hy-Gard J20C or J20D transmission oil. The company recommends using only Hy-Gard oil in the lawn tractor. John Deere J20D is a low-viscosity transmission/hydraulic oil, while J20C is a high-viscosity product.
How much oil goes in a John Deere L130?
John Deere L130 Engine
| Engine Oil | |
|---|---|
| Oil capacity: | 2 qts 1.9 L |
What size is a John Deere oil filter?
John Deere Oil Filters
| Height | 2-7/8″ |
|---|---|
| OD | 2-11/16″ |
| Pressure Relief | 9-12 PSI |
| Thread Size | 3/4″-16 |
| Replaces | JOHN DEERE AM101054, AM107423 |
What year was the John Deere L130 made?
The John Deere L130 is a 2WD lawn tractor from the L100 series. This tractor was manufactured by John Deere from 2003 to 2005. The John Deere L130 is equipped with a 0.7 L V-twin Kohler gasoline engine and belt-driven hydrostatic transmission with infinite forward and reverse gears.
Can I use 5W30 motor oil in my lawn mower?
Yes! We have recently modified our engine oil recommendations to state that you may now use a synthetic 5W30 or 10W30 oil in all temperature ranges. Please keep in mind that the use of synthetic oil does not preclude you from performing your regularly scheduled lawn mower maintenance (i.e. check oil, change oil, etc.)
What oil goes in a hydrostatic transmission?
The fluid recommended for Hydro-Gear transmissions and pumps is a 20W-50 motor oil or 15W-50 synthetic motor oil. If the machine has oil reservoirs, they are mounted to the frame behind the seat, for easy access and oil level check accessibility.
How many blades does a John Deere L130?
Deck Rebuild Kit Compatible with GY20996 & John Deere 48″ Models L120 / L130 Includes (3) Spindles, (3) 17″ Blades, (1) 17/32″ x 138-7/8″ Belt, (2) Idler Pulleys OD 3-5/8″, (1) Idler Pulley OD 5-1/8″
What kind of oil goes in a John Deere riding lawn mower?
10W30 oil
All John Deere mowers with gas engines take 10W30 oil. Any diesel mower engines will take 15W40 oil. You’ll need about two quarts of oil every time you do this service.
Who make John Deere oil filters?
Most of the Deere filters are made by Donaldson. The d with a dot in the middle is the Donaldson logo next to the Deere part number. A lot of the fuel filters are proprietary to the manufacturer of the fuel system and are made by them and simply rebranded for many different boxes.
Is there a difference between AM125424 and AM125424c?
The AM125424 is just the filter the AM125424c is a kit which comes with other stuff.
Can you tell the year of a John Deere tractor by the serial number?
The 8th digit of the tractor identification number corresponds to the tractor’s model year. To determine the model year, locate the 8th digit of your identification number and compare it to the appropriate table below. The 8th digit of the number is 1.