What is Cisco UCS 6248UP?
What is Cisco UCS 6248UP?
The Cisco UCS 6248UP 48-Port Fabric Interconnect is a core part of the Cisco Unified Computing System. Typically deployed in redundant pairs, the Cisco UCS 6248UP Fabric Interconnects provide uniform access to both networks and storage.
What is Fi in UCS?
The Unified Computing System (UCS) Fabric Interconnect (FI) is a core part of the design to improve scalability and reduce the total cost of ownership of data centers. Through integrating all components into a single platform, the system acts as a single unit which simplifies management.
What is Cisco UCS 6200 Series Fabric Interconnect?
The Cisco UCS 6200 Series Fabric Interconnects are a core part of the Cisco Unified Computing System, providing both network connectivity and management capabilities for the system. The fabric interconnect supports multiple traffic classes over a lossless Ethernet fabric from the blade through the interconnect.
How do you upgrade UCS Fi?
To upgrade the Cisco UCS Infrastructure Firmware, perform the following:
- Select the Equipment tab and then select the Firmware Management tab.
- From the Firmware Management tab, select the Firmware Auto Install tab.
- Select Install Infrastructure Firmware Upgrade.
- On the Prerequisites page, do not check any boxes.
What is Cisco UCS chassis?
OVERVIEW. The UCS 5108 chassis is a 6RU chassis the that can accommodate up to eight half-width, four full-width or any combination of blade form factors (M1 – M5 generation) that will fit in the available number of blade slots. The chassis has two I/O bays for Fabric Extenders or Fabric Interconnects.
How do I reset my Cisco Fabric Interconnect?
Connect to the console port or the SSH into the Fabric interconnect, login to FI and then you are in 🙂 . Run the first command to connect to the local-mgmt. Next command will erase the configuration of FI and then system will reboot.
What is UCS used for?
A unified computing system (UCS) is is a converged data center architecture that integrates computing, networking and storage resources to increase efficiency and enable centralized management. UCS products are designed and configured to work together effectively.
Which cables would you use to connect link 1 and link 2 ports on fabric interconnects?
To use the cluster configuration, the two fabric interconnects must be directly connected together using Ethernet cables between the L1 (L1-to-L1) and L2 (L2-to-L2) high availability ports, with no other fabric interconnects in between.
What is Cisco FEX?
What Is Cisco FEX? A Cisco FEX is a companion to a Nexus 5000 or Nexus 7000 switch. That’s to say, when being connected to them, FEX thus become a logical part of the parent switch. A Cisco FEX has no management interface and has no capability to store a forwarding table or run any control plane protocols.
How do I update my UCS capability catalog?
Click Update Catalog. In the Update Catalog dialog box, click the Remote File System radio button in the Location of the Image File field and fill in the required fields. Click OK. Cisco UCS Manager downloads the image and updates the Capability Catalog.
What operating system does Cisco UCS use?
The fabric interconnects are derived from the Nexus 5500 and 9300 series switch families and run NX-OS as well as UCS Manager software.