Guidelines

How do I connect my Klipsch soundbar to my TV remote?

How do I connect my Klipsch soundbar to my TV remote?

RSB Series – TV Remote Programming

1. Press and hold the “Mute” button on the front of the sound bar for 3 seconds.
2. The source that the bar is currently on will start flashing, indicating it is in remote programming mode.
3. On the front of the sound bar, press the button you wish to program once.

How do I program my Comcast remote to my Klipsch soundbar?

Programming an Xfinity X1 Remote to Your Soundbar

1. Make the Soundbar the receiver output.
2. Press the Setup button on your Xfinity X1 remote.
3. Wait until the LED light at the top turns green.
4. Enter the Soundbar’s manufacturer code.
5. Wait for the LED light to flash twice (in green)
6. Test the remote.

How do I reset my Klipsch remote?

Bar 48 – Factory Reset

1. Press and hold the Power and Source Select buttons simultaneously for a full 10 seconds.
2. Once complete, you will see the source LED light on the front of the bar turn Orange with three white LED’s on top of it.

How do I connect my Klipsch to my TV?

Use a standard Digital/Optical cable (not included) to connect The Fives to the TV via Optical. Plug one end of the Optical cable into the Optical port of the TV and the other end into the Optical input on The Fives. Set the Source wheel on The Fives to Digital.

How do I pair my Klipsch RSB 6?

RSB-6 – Reconnecting the Subwoofer

1. Using a paperclip, or a similar small tool, press in the small recessed button located directly below the “PAIR” text on the back of the subwoofer.
2. You should then notice the subwoofer’s status LED flashing, indicating it is now in pairing mode.

Where is the Setup button on an Xfinity Remote?

It’s on the bottom left or top right of your Xfinity remote. If you have an XR2, XR5, or XR11, it’s a small gray circle or square on the bottom left. Some XR2 or XR5 don’t have setup buttons.

How do you test a Klipsch subwoofer?

To do this, let’s try something called a “buzz test”: Do not plug the other end of that sub cable into your receiver or sub output. Instead, grab the unplugged end of the cable and touch the male RCA post a few times to see if you can hear the sub give you a “buzz” sound each time you touch the post.

How long is Klipsch warranty?

five
Klipsch Group, Inc., (KGI), 3502 Woodview Trace, Suite 200, Indianapolis, Indiana (USA) 46268, warrants to the original retail purchaser that this product will be free from defective materials and workmanship for five (5) years from the date of purchase, subject to the limitations below.

How do I connect my Klipsch 5 to my TV?

The Fives – Connecting to TV through HDMI ARC

1. Insert the included HDMI cable into the HDMI (ARC) input on The Fives.
2. Plug the other end of the HDMI cable into the HDMI (ARC) output on the TV.
3. If you have other devices to connect to your TV, insert another HDMI cable into the TV’s input.

How do I pair my Klipsch subwoofer?

If for some reason they become unpaired at any time, it’s a quick and easy re-pairing process: simply hold the “pair” button on the back of the sub for 3 seconds. The blue LED on the back of the sub will start to blink. While it’s blinking, press the ‘pair’ button on the back of the soundbar once.

How do you turn on a Klipsch soundbar?

plug the Ac power supply into a “live” electrical outlet and turn the soundbar’s Main power switch on the rear of the soundbar to “on”. on the front of the soundbar, make sure the left status light is either solid green or orange (press any button once if light is steady red).