How do I know if my chainsaw oil pump is bad?
How do I know if my chainsaw oil pump is bad?
Generally speaking, the signs of a chainsaw oiler problem are easily spotted. If the chainsaw seems like it’s getting too hot or producing smoke, that is a sign that there is an oil deficiency in the chain. This is not good for the life of your chainsaw. If you spot this problem, it is time to troubleshoot the issue.
How do you unclog a chainsaw oiler?
The most common reason a chainsaw oiler stops working is that the oil hole gets clogged. To fix this, remove the chain and bar from your chainsaw and clean the oil hole and oil outlet port. If this doesn’t fix the problem, you’ll probably need to replace the oil line or pump.
How does chainsaw bar oiler work?
Specially engineered chainsaw bar oil goes into the oil reservoir. As you throttle up, a worm drive engages the pump to send oil through a port that releases onto the bar. As the chain moves across the bar, it distributes the oil across the surface, reducing the friction and the heat that occurs when cutting.
What to do if your Husqvarna chainsaw has too much oil?
Turn the screw counterclockwise to open the oiler up, allowing more oil to drip onto the chain. If the bottom half of the chainsaw is black from too much oil, turn the screw clockwise to tighten the oiler so that it cuts down on the amount of oil reaching the chain.
How to adjust the oiler on a Husqvarna 55?
Insert the screwdriver into the screw and turn it forward toward the minus sign to decrease the bar oil flow. Turn the screw backward to the plus sign to increase the oil flow. Fill the chain and bar oil and the gasoline tank before each use of a chainsaw. When the gasoline tank runs dry, there will be some oil remaining in the oil tank.
Where is the oil switch on a Husqvarna chainsaw?
However, the Husqvarna chainsaw oiler can easily be adjusted with a screwdriver. Check the ignition switch to ensure the chainsaw is turned off. The switch, located in front of the handle, should be in an upward position if it is turned off.
Do you need to clean the oil ports on a chainsaw?
Proper lubrication keeps the parts cool and extends their life. Cleaning your chainsaw oil ports keeps the oiler working correctly; clean it before adjusting the oiler.