What is a banjo pump used for?
What is a banjo pump used for?
Banjo Pumps are used in various Agriculture and Industrial liquid flow applications. Banjo Pumps are available in cast iron materials and are available in 1 ½”, 2” 3”, and 4” depending on Type.
What is a banjo pump?
Product Description. The BANJO 200PH-5 2″ POLY PUMP with GX160 SERIES HONDA ENGINE is designed for agricultural and industrial spraying and application of variety of fluids. The precision molded lightweight body is built of chemical resistant polypropylene to resist corrosion.
Why are they called banjo fittings?
The name stems from the shape of the fitting, having a large circular section connected to a thinner pipe, generally similar to the shape of a banjo.
Do banjo bolts have to line up?
Those seals allow fluid to pass around the bolt, which means the holes do not need to line up unlike a standard threaded fitting, making installation of flexible lines easy (and in many cases, even possible in the first place.) Here you can see some banjo bolts and their sealing crush washers.
How tight should brake banjo bolts be?
Banjo Bolts should be tightened to 12 to 14 foot pounds – Do not over torque.
Can you bleed brakes through banjo bolt?
Easily install a bleeder screw anywhere in your brake or clutch system! 25 banjo bolt has a 1/4-28 bleeder screw so you can bleed air out of the system directly at the master cylinder instead of pumping the air all the way through to the caliper.
How do I stop my banjo bolt from leaking?
Try doubling the washers on the leaking side as a last resort. Also be sure you are installing the washers in the correct direction. They have two different sides and require proper installation. Use brand new washers.
How many washers does a banjo bolt?
The banjo bolt is designed to have two washers—one on each side of the fitting. One of the washers is situated under the banjo bolt head, while the other bolt washer is located between the caliper and the brake line.
What is the torque on the brake caliper bolts?
Because caliper bolts MUST stay on, they need a LOT of torque. AutoZone, for example, recommends 113 pound feet of torque. To put that number in perspective, the average person can, according to NASA, apply about 15 pound feet with a bare hand.
Can you reuse banjo bolts?
The banjo bolt will be fine to re use. The washer is a compressible washer. The material is softer and when tightened down it seals when compressed.
What kind of pump is a banjo pump?
BANJO PUMPS line includes durable cast iron pumps (bare, engine & motor driven) for rugged, dependable service. Banjo Poly Pumps for excellent chemical & corrosion resistance, stress cracking & impact resistance. Briggs or Honda Driven Banjo Pumps, and stainless steel pumps.
What can a banjo and banjo bolt be used for?
They are also used for lift pumps, filter assemblies and fuel line connections. Where access is limited for space for a direct connection, often a banjo and banjo bolt is used for a 90 degree access starting from 6mm up to 16mm. Size of supply pipe varies from 3 sixteenths to 13mm
How big is the supply pipe for a banjo?
Where access is limited for space for a direct connection, often a banjo and banjo bolt is used for a 90 degree access starting from 6mm up to 16mm. Size of supply pipe varies from 3 sixteenths to 13mm We stock a very wide range of banjos which go from 6mm to 16mm, and are all metal and can be single stem, double stem and triple stem.