How do I adjust the temperature on my electric fireplace?
How do I adjust the temperature on my electric fireplace?
To increase the temperature, press the Temperature But- ton J. If the temperature setting is higher than the room temperature, the electric fireplace heater and fan won’t turn on. The heating icon will light up. The temperature can be decreased by pressing the Temperature Button P.
What do the buttons on my electric fireplace mean?
Here’s what the controls look like on my electric fireplace, including what their purpose is. A – Thermostat Dial. B – Main On and Off Switch (turns on the flames) C – Low Heat Setting On and Off Switch. D – High Heat Setting On and Off Switch.
Why did my electric fireplace stop working?
When a wire comes loose or the motor stops functioning, the flame will freeze. Check the wiring to make sure that all connections have good contact. Look for exposed and frayed wires. If everything looks good, it’s probably time to replace your flame motor.
How do you troubleshoot an electric fireplace?
6 Tips for Troubleshooting Your Electric Portable Fireplace
- Check the Power. Because electric portable fireplaces run off electricity, the first place to check is in the power supply when the unit is not working.
- Check the Breaker.
- Check the Lightbulb.
- Check Fuses.
- Clean the Fan.
- Check Your Model’s Manual.
Where is the reset button on electric fireplace?
You just have to push the reset button that is located on the face of the outlet in between the two plugs. If your electric fireplace is plugged into an outlet that is controlled by a wall switch, make sure the wall switch is flipped to the ON position.
How do I reset my electric fireplace insert?
SOLUTION: Turn all switches to the “off” position and unplug the unit from the wall for five minutes. After five minutes, power everything back on.
How do you reset an electric fireplace?
How do you reset a Furrion electric fireplace?
Once you have checked the inlets and outlets and made any adjustments, you can unplug the fireplace for 15-20 minutes to reset the circuit board. Our tech at Furrion mentioned sometimes simply shutting off the fireplace does not allow it to cool down properly.