How much is maple per Boardfoot?
How much is maple per Boardfoot?
Shipping Additional
| Board-Feet | ||
|---|---|---|
| < 10 | 100 – 499 | |
| 5/4 Hard Maple (Sel & Btr, #1 & 2 White, S2S to 1-3/16) | $8.50 | $6.40 |
| 8/4 Hard Maple (1 Com, #1 & 2 White, Rough) | $5.50 | $4.15 |
| 8/4 Hard Maple (Sel & Btr, #1 & 2 White, Rough) | $8.90 | $6.70 |
What is the thickness of 8 4 lumber?
2 inches
So, a “4/4” board is four quarters, or 1 inch thick, an “8/4” board is eight quarters, or 2 inches thick, a “10/4” board is ten quarters, or 2.5 inches thick, etc. Board Foot: Rough sawn lumber is usually sold by the “board foot” (bd.
How much is maple wood cost?
Unstained maple typically costs around $6 to $8 per square foot, while stained maple costs $8 to $14 per square foot. That cost includes labor and installation.
What is S3S wood?
Surfaced Three Sides: S3S It stands for “Surfaced Three Sides”, which, as used in Goosebay’s hardwood lumber descriptions, indicates that two faces have been planed, and one edge has been processed with a straight-line rip saw, rendering the edge straight and smooth.
What thickness is 4/4 wood?
1 inch
A “quarter” system is commonly used in the hardwood lumber industry when referring to thickness. 4/4 refers to a 1 inch thick board, 6/4 is 1-1/2 inch, 8/4 is 2 inches, and so on.
What is S4S dimensional lumber?
surfaced on 4 sides
S4S stands for “surfaced on 4 sides”, meaning that the material is finished on all four sides. Dimensional lumber is commonly S4S. S4S finished lumber and dimensional lumber are labeled according to nominal size, or the size of the rough board before it was planed smooth. (For example, 1 x 6 is actually 3/4 x 5 1/2).
What are the three sides of a board?
Style: Edge Grain v. Wood has three sides of grain: (1) face grain, (2) edge grain, and (3) end grain. Face grain is typically used for serving boards and tabletops, so let’s move along to edge v. end.
Why is birdseye maple so expensive?
Items made with this wood tend to be more expensive not only because the wood is more costly but because it is harder to work. When working with bird’s eye wood, it is advisable to take care in what tools are used, so as to prevent grain tearout.
Is birdseye maple strong?
Birdseye Maple is distinguishable from Hard Maple by the round patterns scattered throughout the wood. Weight averages about 45lbs per cu. ft. High bending and crushing strength.