What are the dimensions of an architectural shingle?
What are the dimensions of an architectural shingle?
An architectural shingle is made of two strips of asphalt shingles laminated together. The shingles in this range have 36-39 3/8 inches length and 12-13 1/4 inches width. Architectural shingles are 50% heavier and thicker than 3-tab shingles.
How long is a roofing shingle?
In the past, most 3-tab shingles were “Imperial”-sized at 12 inches wide and 36 inches long with an exposure of 5 inches. Now, most 3-tab shingles, typically referred to as “metric” shingles, are larger. Metric shingle exposure is proportional to their larger size, commonly 5 5/8 inches.
How big is a shingle bundle?
How Many Square Feet Does A Bundle Of Shingles Cover? One bundle of shingles covers roughly 33 square feet of roof. Some manufacturer bundles will cover slightly less and will range from 28 up to 33 square feet. For some brands and types, the square feet per bundle may vary.
Are roof shingles all the same size?
These shingles are basic and widely used. They provide solid performance and are a budget-friendly option. Every shingle is cut into three equal “tabs”—the part of the shingle that you can see after it is installed. Every shingle is the same size, thickness, and shape, which gives the roof a uniform look.
How many inches does a shingle cover?
The standard asphalt shingle exposure is 5-inches.
What is the lifespan of an asphalt shingle roof?
Vented properly and installed correctly, you should get around 80-85% of the life span out of an asphalt roof. That means you can expect to get about 20-22 years out of your 3-tab shingle roof and 25-28 years out of your dimensional shingles.
How many square feet does 3 bundles of shingles cover?
33.3 sq. ft.
Calculating the number of bundles, you need is simple if you are using shingles that come three bundles to a square. Each bundle covers 33.3 sq. ft.
Are there different grades of roofing shingles?
There are three primary types of asphalt shingles used for the roof on a house: 3-tab shingles, dimensional shingles, and luxury shingles. 3-tab shingles — also referred to as three-tab shingles. Dimensional shingles — sometimes called architectural or laminate shingles.
What is the reveal on a 3-tab shingle?
Three-tab shingles are usually 36 inches long; each tab is 12 inches. They are designed to be installed with a 5-inch reveal. Some roofers install shingles so the cutout lines describe a slight angle as you look from the bottom to the top of the roof.
What is a 3-tab shingle?
3-tab shingles are flat, and they have a single tab shape and size. They are uniform, which gives them a flat look. Architectural shingles are also referred to as dimensional shingles. This is because they provide a more dimensional look to the roof.
How big is a strip of asphalt shingle?
Once upon a time, traditional strip or 3-tab shingle dimensions, as well as asphalt shingle dimensions, measured 12 inches wide by 36 inches long. These are still considered standard asphalt shingle dimensions.
What are the dimensions of Iko asphalt shingle?
Compare the sizes and advantages of every asphalt roofing shingle IKO produces. Once upon a time, traditional strip or 3-tab shingle dimensions, as well as asphalt shingle dimensions, measured 12 inches wide by 36 inches long. These are still considered standard asphalt shingle dimensions.
Which is the standard specification for asphalt shingles?
H.ASTM D 3462 – Standard Specification for Asphalt Shingles Made from Glass felt and Surfaced with Mineral Granules. 1.2 REFERENCES (continued) Standards and Building Codes: I.ASTM D 4586 – Standard Specification for Asphalt Roof Cement, Asbestos –Free.
Can you use asphalt shingles on a slope?
The asphalt shingles can also be used in slopes in the range of 2 in 12 which are flat and 21 in 12 that are steeper in nature. But special application procedures apply. Two types of asphalt shingles are mainly used in roof construction. One is three-tab shingles. This has two slots, that divide the exposed part of the shingle into thirds.