Are Belfast sinks standard size?
Are Belfast sinks standard size?
Double Belfast sinks typically measure 2.5 feet across, 800mm, but sizes can vary by up to 3%. The largest Belfast sinks we offer measures 3 feet, 915mm, but as one large bowl capable of soaking the largest of pans.
What worktops go with a Belfast sink?
Bushboard Evolve and Bushboard MStone worktops are both suited to a Belfast or Butler sink because they are very unlikely to suffer from water ingress.
What’s the difference between a butler sink and a Belfast sink?
The Belfast sink is a variation of the Butler sink; the only difference being that, traditionally, the Belfast had an overflow and the Butler had a shallower bowl with no overflow. Nowadays, both the Belfast and the Butler have overflows, although a weir overflow is only found on the Belfast sink.
Should worktop overhang Belfast sink?
You are right to consider the benefits that a worktop overhang can offer, as – indeed – any overflowing water could cause significant damage if left to sit on the worktop beneath your Belfast sink for an extended period of time. We recommend an overhang of between 7 and 10mm.
How much space do you need for a Belfast sink?
It is usually recommended a nominal 10mm to overhang the sink but up to 15mm is fine to ensure a good even overhang. At this point there is usually a small gap between the sink and worktop, fill the gap with a bead of silicone. See also below.
Why have a double Belfast sink?
Of course, a double offers even more convenience. A double bowl belfast butler sink is the saviour of the family home, blessing all with ample space and an always clean kitchen sink – even if the other one is full of dirty dishes or water.
Can I fit a Belfast sink with laminate worktop?
In answer to your question, Belfast sinks are not commonly recommended with laminate worktops. This is because of the way the sinks are positioned as undermounted solutions. In order to accommodate a Belfast sink, you would need to cut out a suitable aperture, then re-finish the exposed chipboard with edging strip.
How do you put waste in a Belfast sink?
Fitting a Belfast waste with a weir type overflow A slotted waste, clearly showing the slot in the outlet. If your Belfast sink has a “weir” type overflow like this. Then you will need a slotted waste outlet in order to collect the overflow water and to divert it down your waste pipe.
Is a Belfast sink the same as a farmhouse sink?
Traditionally, the Butler sinks were shallower than a Belfast sink whereas today, the two are the same. Similarly, the apron sink has the same depth as a Belfast/Butler sink although they used a different type of clay that creates thinner walls, if you like, giving them a more elegant look.
Can you pour boiling water into a Belfast sink?
You can pour boiling water into a sink, followed by ice-water, and there will be no cracking. It is also resistant the hard knocks, so chips and cracks are rare. So is there any difference between a Belfast sink and a butler sink?
Do Belfast sinks chip easily?
Also chemical resistant, due to the heavy duty glazed surface, which also makes them resistant to chips and scratches and renders the surface hypoallergenic.