Can VERSATEX be painted?
Can VERSATEX be painted?
VERSATEX does not require painting for protection. Use paints that are 100% acrylic latex or acrylic latex with urethane additive. **CAUTION: PAINTING ANY CELLULAR PVC TRIM, INCLUDING VERSATEX, DARK COLORS, CAN RESULT IN POOR PERFORMANCE AND WILL VOID THE WARRANTY.
Can you sand VERSATEX?
Sanding the surface is an acceptable method of removing blemishes if painting. A: Only light to medium colored paints with a light reflective value of 55 units or greater should be applied to VERSATEX. Using a paint with an LRV below 55 units will void our product warranty. Don’t assume the paint is a light color.
Can I nail PVC trim?
Fasten PVC trim with stainless steel screws or hot-dipped siding nails. When it comes to choosing your fasteners, don’t scrimp by using fasteners that won’t last as long as the vinyl trim. You can also use hot-dipped galvanized nails, but they may corrode and stain the trim over time.
How do you paint Royal PVC trim?
Royal PVC does not require painting for protection, but it can be painted with 100% acrylic latex paint to achieve custom colors. A second coat may be needed to achieve desired colors. Dark colors are not recommended with PVC, so be sure to check what’s allowed before painting.
Is Versatex the same as AZEK?
SKOKIE, Ill., June 18, 2018 /PRNewswire/ — The AZEK Company (“AZEK”), an industry-leading manufacturer of low-maintenance residential and commercial building products, today announced it has completed the acquisition of Versatex, an innovative manufacturer of highly engineered cellular PVC products.
How do you paint PVC trim boards?
Remove and Clean the Trim
- Remove and Clean the Trim.
- Remove the trim with a pry bar, if possible, and lay it on a workbench or a table.
- Sand the Trim.
- Scour the surface with 220-grit sandpaper.
- Apply a Primer.
- Brush on a PVC paint primer that is made to accept a latex topcoat.
- Paint the Trim.
Can Royal PVC trim be painted?
Does azek own VERSATEX?
What do you use painted fasteners on for?
Commonly used in the decking, roofing, carpentry, OEM, and Mil-Spec industries, painted fasteners can serve both the need for a decorative appearance, such as with colored metal roofing screws, as well as functional purposes, such as colored screws for electrical color-coding.
What kind of fasteners should I use for wood trim?
Fastening • Use fasteners designed for wood trim. They should have thin shanks, blunt points, and full round heads. • 1Fasteners should penetrate 1 / 4” into substrate. • 3Fasteners should be positioned no less than / 4” or more than 2” from end of board. • Fasteners must be weather resistant, such as stainless steel or hot dipped galvanized.
What’s the best way to paint wood trim?
Clean and dry your painting tools. After the prep work and primer, the trim is ready for paint. Pour thoroughly mixed paint into a clean paint tray. Dip no more than an inch of the angled paint brush into the paint and wipe away excess. Use short stokes to cover a few feet of the trim.
Are there painted fasteners for metal roof screws?
In most instances, such as colored screws for metal roofs, we can match your supplier. AFT Fasteners is dedicated to providing our customers with high-quality painted head screws, bolts and fasteners. Our specialty fastener spray coatings are suitable for most applications where a decorative, color-matched fastener is needed.