How do I fix a Replace Drum message on my Brother laser printer?
How do I fix a Replace Drum message on my Brother laser printer?
Close up the front cover. Hold down the “OK” button and the “up” arrow at the same time. Press the “OK” button to select “Drum”. Select the “down” button to reset the drum counter.
How do I reset my printer after replacing drums?
DO NOT reset the drum counter unless you are replacing the drum unit.
- Close the front cover.
- Make sure the machine is turned on.
- Press. (Settings).
- Press All Settings.
- Choose Machine Info. or Machine Information => Parts Life.
- Press and hold Drum or Drum Life until the machine’s display message changes.
- Press Yes.
- Press.
Is a printer drum the same as toner?
In short, the toner cartridge is a container that contains the toner powder, whereas the drum unit is an electrically charged cylinder that transfers the powder onto paper.
How do you know when a laser printer drum needs to be replaced?
The drum unit may need replacing if you notice the printer producing blurry, low-quality images. Black or colored toner spots on printouts also indicates a failing drum unit. In some cases, horizontal lines may develop across the printout every time the paper passes the failing part of the drum.
How long does a drum last on a Brother laser printer?
There are many factors that determine the actual drum life, such as the temperature, humidity, type of paper, type of toner used, number of pages per print job and so on. Under ideal conditions, the average drum life is estimated at approximately 12,000 pages.
Do you need to replace drum on laser printer?
With lasers, mirrors, photoconductor drums, rollers, and fusing units, all being essential to the printing process. These parts must be properly maintained and replaced as needed. It may come as a surprise for some, but drum units need to be replaced every so often to keep up the quality of the printing.
How do I Reset my Brother hl-2130 drum counter?
Open the front cover. 3. Press and hold the GO button for 4 seconds or until all the LED’s light up. 4. Release the GO button and close the front cover. Your drum counter should now be reset. Good luck! Loading…
Can a brother toner cartridge be replaced with a drum unit?
The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the drum unit and not the toner cartridge. If you want to know their difference, refer to “What is the difference between the toner cartridge and the drum unit?” Replace the drum following the steps below:
How do I Reset my Brother drum machine?
Close the front cover of the machine. When you replace the drum unit with a new one, you need to reset the drum counter by completing the following steps: Make sure the machine is turned on. Open the front cover. Press and hold OK for about two seconds to display Drum Unit, and then press OK. Press the Up arrow key to reset the drum counter.
How can I Make my Brother printer Print?
For optimum performance of your printer, perform an update to the latest firmware. Click here to update the firmware. Find the answers to our most frequently asked questions and troubleshooting here. Original Brother ink cartridges and toner cartridges print perfectly every time.