How do I fix error 5011 on my Canon printer?
How do I fix error 5011 on my Canon printer?
Fix: Canon Printer Error 5011
- Unplug your printer and let it stay off for 3 minutes, then power it back on and test. If it doesn’t work, then turn it off again.
- Lift the lid from the printer, including the scanner. With the lid open, turn the printer back on.
- Then close the lid and see if that fixes the issue.
How do I clear the error on my Canon Pixma printer?
Reset the Canon printer
- Switch on the printer.
- Press and hold the Stop/reset button.
- Press the button that you use to make a color copy and hold it down.
- Wait 5 seconds.
- The printer now reboots and sets itself up.
- Does the printer indicate that the device needs to be calibrated?
- You’ve reset your printer.
Why am I getting an error message on my Canon printer?
Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you’re trying to print. The loading bay for your paper might have become lodged with paper or you’re using the wrong type of paper.
What is code 5011 on Canon printer?
The error 5011 is one of those errors which we can see facing by our canon printer. If the cartridge holder becomes constant and refuses to move to the center then this error 5011 occurs in your canon printer. This error is indicating a technical error that occurs in your canon printer.
What is wrong with my Canon Pixma printer?
The solution is to restart the Canon PIXMA printer, system, and the wireless router. Remove the power cable from the printer’s rear to solve the Canon printer won’t print wirelessly issue. Switch the Mac or Windows computer Off and reinsert the power cable to your Canon PIXMA printer, and then power it up.
How do I get my Canon printer out of error state?
How do I get my printer out of an error state?
- Make ports settings changes. Press the Windows logo key + R on your keyboard > type devmgmt.msc and hit Enter to open the Device Manager.
- Make sure that your printer is Online.
- Reinstall the printer driver.
- Set the Print Spooler service to automatic.
- Update Windows.
How do I fix my Canon U051 error?
How do I clear the U051, U052, U053 or U059 error message?
- Check to make sure your cartridges carry the correct codes.
- Check the cartridges contacts are clean and un-obscured.
- Change the ink cartridge.
- Clean the contacts inside the printer.
How do I fix my Canon Pixma printer Error 6000?
Methods to Resolve Canon Printer Error 6000
- Firstly, Unplug the printer from the power source and leave it in pause mode for few mintues.
- Now, plug in the printer again and switch it on.
- Just repeart this process once or twice and then release the “Power” button.
- Snap the “Stop” button 4-5 times.
Why does my Canon printer say error 5011?
Home/ Hardware/ Canon Printer/ Canon Printer Error 5011 Problem On your Canon printer, the cartridge holder will not move into the centre. Additionally, if you go to print, a message appears on the computer or printer display indicating Error 5011. It advises to turn your printer off and on again which doesn’t resolve the problem.
What is the error code on a Canon printer?
The error 5011 is one of those errors which we can see facing by our canon printer. If the cartridge holder becomes constant and refuses to move to the center then this error 5011 occurs in your canon printer.
Why does my Canon printer not move cartridge holder?
On your Canon printer, the cartridge holder will not move into the centre. Additionally, if you go to print, a message appears on the computer or printer display indicating Error 5011. It advises to turn your printer off and on again which doesn’t resolve the problem. Get the printer repaired by the provider or manufacturer.
What should I do if my Canon printer is not working?
Canon suggests that the printer must be repaired, in some cases repair is required but before you turn your printer over to Canon; try the following steps as it may fix the issue: 1. Unplug your printer and let it stay off for 3 minutes, then power it back on and test. If it doesn’t work, then turn it off again.