Contributing

How do I fix the U052 error on my Canon printer?

How do I fix the U052 error on my Canon printer?

Cause and Solution

1. Lift the Scanning Unit (Cover) until it stops.
2. The Print Head Holder moves to the installation position.
3. Firmly lift the part of the Print Head Lock Lever in the Print Head Holder until it stops.
4. Raise the print head and put it back.
5. Hold the Print Head Lock Lever firmly and lower it completely.

How do I clear a Canon printer error?

Reset the Canon printer

1. Switch on the printer.
2. Press and hold the Stop/reset button.
3. Press the button that you use to make a color copy and hold it down.
4. Wait 5 seconds.
5. The printer now reboots and sets itself up.
6. Does the printer indicate that the device needs to be calibrated?
7. You’ve reset your printer.

What is a B200 error on a Canon printer?

The dreaded B200 Error on your Canon Printer usually indicates that the print head has died! Remove Print Head and thoroughly clean all of the gold contacts on the print head itself.

How do I fix canon 5011 error?

Fix: Canon Printer Error 5011

1. Unplug your printer and let it stay off for 3 minutes, then power it back on and test. If it doesn’t work, then turn it off again.
2. Lift the lid from the printer, including the scanner. With the lid open, turn the printer back on.
3. Then close the lid and see if that fixes the issue.

Where is the reset button on Canon Pixma?

The reset procedure of the Canon printer is very simple. Find the Stop button on the control panel of the printer. Press the Stop button and hold it for a few seconds. Do not release it until the Orange color Alarm lamp blinks 21 times.

How do I fix the orange flashing light on my Canon printer?

1. Turn off the printer.
2. Press “Resume” and, without releasing the button, then press “Power” until there is a beep or the green LED lights up.
3. Release “Resume” while holding down “Power”.
4. Press Resume twice and release the two buttons.
5. When the lights stop blinking, press “Resume” 3 times.
6. Press “Power” to confirm.

How do I fix error U052?

U052 The type of print head is incorrect….Follow these steps to be sure that the print head is properly seated:

1. Make sure that the printer is turned on, and gently open the paper output tray.
2. Lift the scanning unit cover and hold it open with the support (A).
3. Push the tab (B) and lift the ink tank to remove it.

What does B mean on a Canon printer?

(B) Color Ink lamp. (C) Black Ink lamp. Color Ink lamp or Black Ink lamp lights. The ink is running low. Prepare a new ink cartridge.

What is the error code for Canon printer u052?

U052 The type of print head is incorrect. Install the correct print head. Make sure that the printer is turned on, and gently open the paper output tray. Lift the scanning unit cover and hold it open with the support (A). The print head will move to the replacement position.

What is the error code on my Canon printer?

The screen is telling me, The type of print head is incorrect. Install the correct print head. This is one of two printers I have in my home office. I have been buying replacement printer cartridges from Ink Sell for years with no issues.

What does the error code u051 / u052 mean?

Reseat the Print Head to resolve the U051 / U052 error. Description. The error U051 / U052 indicates that a communication issue with the print head has occurred. This can be caused either by the print head not being seated properly or a hardware failure.

Is there a problem with my canon mp610?

Along with many, I have the same recurring problem with my MP610. One noteworthy difference (Canon support) is that it works fine on my desktop and laptop (Win7) and only creates the error with my wife’s laptop (HP with Win7). I’ve reinstalled the driver several times on her laptop and it works a few times but then comesback.