How do I get digital audio output from my computer?
How do I get digital audio output from my computer?
To connect digital audio from your PC to an AV receiver:
- Connect the Digital Out connector on the back panel of your PC, to the Digital Input (SPDIF) on your AV receiver or digital audio system. Use only one Digital Audio Out connector at a time.
- Select the AV receiver input.
- Use the AV receiver to adjust the volume.
What is digital audio output PC?
Digital output simply means that the audio devices connected to your computer don’t use analog cables. When using digital output, your audio devices require the correct feature to be enabled on your computer.
What is a digital audio output?
A digital audio out refers to an audio output on a TV, Blu-ray player, game console – or any other AV device that creates sound. This output will send stereo or 5.1 surround sound audio to an amplifier, home theater system or soundbar. There are two main types of digital audio out – optical and coaxial.
Can you use optical audio with PC?
You want to connect your PC’s output to your speaker’s input. Once the optical cable is plugged in, click the speaker icon at the bottom-right corner of your Windows taskbar, then click the speaker name above the volume slider to see if an “Optical” or “Digital” sound output has shown up.
How do I use digital audio output?
Digital Optical
- Connect a digital optical cable to the digital optical output on your TV.
- Connect the other end of the cable to a corresponding digital optical input on a soundbar, home-theater-in-a-box system, or home theater receiver.
- After connecting the cable follow your TV’s and audio system’s setup procedures.
Should I use Realtek digital output?
In fact, it may not be necessary for you to use Realtek Digital Output. So if you are using regular speakers and you (or your computer) have set Realtek Digital Output as Default Device, the sound of your computer may not be able to play normally. You should set the Speakers as Default Device to get the normal sound.
Is Aux analog or digital?
This difference comes down, in part, to their connectivity: optical is digital and aux is analogue.
How do I get Realtek digital output to work?
How to Enable Realtek Digital Output
- Go to your Windows 8 desktop by clicking “Desktop” on the Start screen.
- Right-click the “Speakers” icon and select “Playback Devices.”
- Right-click the Realtek digital output device and select “Enable.”
Can I disable Realtek digital output?
Right-click on the S/PDIF icon (it may appear as “Realtek Digital Output,” “S/PDIF Output” or “S/PDIF,” depending on your sound card or motherboard) and select “Disable” from the contextual menu.
Is digital audio output better than analog?
Both HDMI and optical pass digital audio from one device to another. Both are better than analog (the red and white cables). The biggest difference is that HDMI can pass higher-resolution audio, including the formats found on Blu-ray: Dolby TrueHD and DTS HD Master Audio.
What device gives you an audio output on a computer?
Sound Cards. The most common kind of audio output device is a sound card. This peripheral add-on board connects to your computer’s motherboard via an expansion slot, typically providing audio inputs and outputs in the form of 3.5mm analog jacks.
How do you install audio output device?
Click Start , type Device Manager in the Start Search box, and then press ENTER. In the Device Manager dialog box, expand Sound, video, and game controllers . If there is a speaker icon next to the sound driver, the driver is installed. If there is a yellow question mark next to the sound driver,…
Where’s my sound on PC?
Desktop computers usually have a sound card output jack on the back of the machine, and it is either identified by a green ring around the jack or a headphone icon. Newer desktops may also have a sound output jack on the front of the machine, or even on the monitor.
How can I control audio on my computer?
Open the Control Panel. In the Control Panel , click or double-click the Sound icon. In the Sound settings window, click on the Sounds tab. In the Program Events section, find the sound you want to disable or change.