How do I get my Brother printer to recognize my new drum?
How do I get my Brother printer to recognize my new drum?
I still receive the error message “Replace Drum”, or “Drum End Soon” after I replace the drum unit with a new one.
- Make sure that the machine is turned on.
- Open the front cover.
- Press and hold OK for 2 seconds.
- Press the Up arrow key or 1 to reset the drum counter.
- Close the front cover.
How do I reset my brother hl 2130 drum unit?
How to reset the drum counter:
- Make sure the machine is on, then open the front cover.
- Press and hold the “Go” button for about 4 seconds or until all the LEDs light up.
- Release the “Go” button and close the front cover.
- If the drum light is off, the drum unit is reset.
How long should a drum last in Brother printer?
There are many factors that determine the actual drum life, such as the temperature, humidity, type of paper, type of toner used, number of pages per print job and so on. Under ideal conditions, the average drum life is estimated at approximately 12,000 pages.
How do you fix a drum stop on a Brother printer?
I still receive the error message “Replace Drum” or “Drum Stop” after I replace the drum unit with a new one.
- Make sure that the machine is turned on.
- Open the front cover.
- Press Clear.
- Press 1 to reset the drum counter.
- When the LCD shows Accepted, close the front cover.
How do I reset my brother hl 2140 drum unit?
Reset the drum counter. Press and hold down the white button (shown as blue in the image below) for about 4 seconds until all the LEDs light up. Once all 4 LEDs are lit, release the button. Only when you replace the drum unit with a new one, you need to reset the drum counter.
How do you reset the drum on a brother 2321D?
Reset Drum Brother 2321D – Press and hold the GO button until the 4 lights turn on. – Release the Go button when only the Paper light is on. Wait a few seconds, then close the front cover of the printer and restart the printer.
How do I clean my brother l2540dw?
Make sure that the drum unit gear is on the left side. Turn the edge of the drum unit toward you by hand while looking at surface of the suspected area. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off.
How do you override a drum on a Brother printer?
FAQs & Troubleshooting
- Close the front cover.
- Make sure the machine is turned on.
- Press. (Settings).
- Press All Settings. (This step might be skipped in some models.)
- Choose Machine Info. or Machine Information => Parts Life.
- Press and hold Drum or Drum Life until the machine’s display message changes.
- Press Yes.
- Press.
How to reset the drum counter on a brother?
Reset Drum Unit HL L5200dwt 1 Make sure the machine is turned on. 2 Open the front cover. 3 Press and hold OK for about two seconds to display the [Drum Unit] option, and then press OK. 4 Press for [Reset] to reset the drum counter. 5 Close the front cover of the machine. See More….
How do you reset the drum counter on a printer?
Turn on the printer (assuming it is not already on). Open the front cover. Press and hold the GO button for 4 seconds or until all the LED’s light up. Release the GO button and close the front cover. Your drum counter should now be reset. Note: If you have not replaced the drum this will get you printing again.
How to reset drum counter on brother hl-2250dn printer?
If you’ve changed the drum in your Brother HL-2250DN printer, and the drum light is still lit, this is what you need to do. To reset the counter on your HL-2130, HL-2132, HL-2135W , HL-2240D, HL-2242D, HL-2250DN and HL-2270DW series printers: Turn on the printer (assuming it is not already on). Open the front cover.
How do you reset the counter on a HP printer?
To reset the counter on your HL-2130, HL-2132, HL-2135W , HL-2240D, HL-2242D, HL-2250DN and HL-2270DW series printers: Turn on the printer (assuming it is not already on). Open the front cover. Press and hold the GO button for 4 seconds or until all the LED’s light up. Release the GO button and close the front cover.