How do I get my LG washer to drain?
How do I get my LG washer to drain?
If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water. Another way you can drain the water is by turning off your washing machine and unplugging it from the outlet.
How do I test my LG washing machine drain pump?
Test the drain pump.
- Press POWER to turn the washer ON.
- Press the SPIN SPEED key until HIGH is selected.
- Press the START/PAUSE button to start the SPIN ONLY cycle.
- Listen to hear a humming sound which indicates that the drain pump motor has started working.
How do I fix OE error on my LG top load washer?
Force drain the unit by starting a cycle and pausing it….If you don’t have SPIN ONLY
- Power the unit ON.
- Select a cycle.
- Press START/PAUSE button to START the cycle.
- Allow a few minutes to pass so the cycle begins.
- Press the START/PAUSE button to PAUSE the cycle.
- Run an empty wash cycle to see if issue occurs again.
Why is my LG washing machine not draining?
Unbalanced Load. One of the most common reasons your LG washer won’t drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won’t drain or spin properly and water will be left behind.
How do I fix OE error on my LG washer?
OE can be triggered by a kinked drain hose or a clogged drain pump filter.
- Check for kinked drain hose. Check behind the washer to ensure that the drain hose is not kinked or clogged.
- Test the drain pump.
- Do you hear the humming sound?
- Clean drain pump filter.
- Run tub clean cycle.
- Request Repair.
Why is my LG washer not draining?
What do you do when your LG washer won’t drain?
- Check the Door Lock Switch. Washers will not run if the door or lid is not closed.
- Rebalance the Load. Another simple problem that can stop the washer from draining is an unbalanced load.
- Drain Your Washer Manually.
- Clean the Drain Filter.
- Inspect the Drainage Hose.
- Check That the Drain Pump Is Working.
How do I clear the OE code on my LG dishwasher?
LG has given this error/fault code to show an issue with the dishwasher water drain pump. First, inspect the drain hose for a clog or bend. Second, inspect the dishwasher drain pump for any blockages in the pump housing assembly. Clean any and all blockages and the OE error code should clear.
How do I know if my washing machine drain is clogged?
Observe the washing machine as it pumps water into the hoses and up into the standpipe. If you see water back up and out of the standpipe, your washer’s drain is most likely the issue. The amount of time it takes for the standpipe to fill up and overflow helps you diagnose where the clog is located.
How do I know if my washing machine drain hose is clogged?
An easy way to check that the drain hose is clear is to blow air through it. If nothing is obstructing the drain tube, the problem is most likely at the washing machine pump. If the hose is worn or badly kinked, replacing the hose may improve the ability of the machine to pump water.
What does UE mean on a LG washer?
The “uE” or “UE” error fault code indicates an unbalanced load. Your LG washing machine will try to rebalance the load when it senses an imbalance. Once the washer senses the overload and or imbalance, the washer will flash “uE”. Your LG washer will try to correct itself 3 times.
What does the OE mean on the washer?
OE error code indicates that the washer is unable to drain the water it used during the wash cycle. OE can be triggered by a kinked drain hose or a clogged drain pump filter.
What are some LG washer problems?
Common issues with LG front-loading washers include excessive noise while operating the unit, shaking, appearance of mold, bad odors and regular maintenance procedures that can be both time-consuming and inconvenient. While many of these issues can be prevented or dealt with easily by the unit owner,…
What is error code FE on LG washer?
The FE error code on the LG washer display is indicating a water overflow issue. This means the WATER INLET VALVE may not be shutting off the flow of water and therefore the DRAIN PUMP is running constantly. This may mean the WATER INLET VALVE has failed to shut off the water to the washer and needs to be cleaned, repaired, or replaced.