Other

How do I reset my HP Procurve 2524?

How do I reset my HP Procurve 2524?

Clear/Reset: Resetting to the factory-default configuration

1. Using pointed objects, simultaneously press both the Reset and Clearbuttons on the front of the switch.
2. Continue to press the Clear button while releasing the Reset button.
3. When the Self Test LED begins to flash, release the Clear button.

How do I turn off STP on my HP switch?

Another way to do it is to go to the menu (command menu), in Main Menu choose option 2 (Switch Configuration) and in the next menu choose option 4 (Spanning Tree Operation). On “STP Enabled” choose NO.

How do I reset my HP Aruba switch?

Rebooting Switches

1. In the Network Operations app, set the filter to one of the options under Groups, Labels, or Sites.
2. Under Manage, click Devices > Switches.
3. Click Online to display a table with the list of online switches.
4. In the Switches table, click the switch to reboot.
5. In the Actions drop-down, click Reboot.

How do I enable STP on my HP switch?

Select your root bridge (the central most switch in your network). Enter CLI and type configure to enter config mode. Then enter spanning-tree to enable it. That’s all you need to do on a switch to get STP up and running.

How do I restart my HP switch?

Solution

1. Press the small, recessed Reset button on the face of the switch.
2. Issue the command, reload from within the CLI.
3. Or, issue the command, boot system flash to reboot into either primary or secondary flash.
4. Or, unplug the switch for at least 10 seconds in order to cold boot the device.

How do I Reset my HP switch?

To execute the factory default reset on the switch, perform these steps:

1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch.
2. Continue to press the Clear button while releasing the Reset button.
3. When the Self Test LED begins to blink, release the Clear button.

How do I turn off STP?

Select the network location for which you want to enable or disable STP. Select Wired > Settings > Spanning Tree. Under Spanning Tree Mode, select Disable, STP, or RSTP. Tap Save.

How do I know if STP is enabled?

To view the configured Spanning Tree PortFast enabled ports, run the “show running-config” IOS command as shown below. We can see that PortFast is enabled on access ports fa0/1 to fa0/24. To display a detailed summary of interface information, run “show spanning-tree detail” command as shown below.

How do I reset my Aruba wireless controller?

If your configuration has already been saved, the controller returns the following message: Do you really want to reset the system(y/n): Enter y to reboot the controller. Enter n to cancel this action.

What is STP configuration?

The Spanning Tree Protocol (STP) is defined by IEEE standard 802.1D-1988. The STP generates a single spanning tree inside a network. Such mode proved to be useful for supporting applications and protocols in which frames are delivered out of sequence or as duplicates.

Can a switch have priority 0?

The priority range for an MSTP switch is 0-61440.

How do I reset a stack switch?

When the stack master is reset or powered off….

1. Go to global configuration mode.
2. Issue the command switch current-stack-member-number renumber new-stack-member-number.
3. Return to the privileged EXEC mode and reload the member with the command reload slot current-stack-member-number.

Why is my no shutdown command not working?

09-07-2019 02:53 AM these is my command in router, which is connected to the switch 2960-24TT, the both interface is gigabitEthernet 0/1, but after I type the no shutdown command, the interface still down, how to fix it, what is the problem? And also all the interface of pc connected to the switch are down.

How do you shut down a HP networking switch?

Got the answer from HP Networking support: Thank you for contacting HP Networking Support. The only way to completely shut down the switch is by pulling the power plug. This is by design. Since the switch can only be powered off through physical intervention, it negates the risk of someone inadvertently issuing a command to shut it down remotely.

Is there a shutdown command for ProCurve switches?

Procurve switches are designed to be always on…there isn’t really a shutdown command for E-series switches that I know of (and I have done a lot of testing on them).

How to enable no shutdown in Cisco switch?

“No Shutdown” Command – Enable Interface To enable an interface FastEthernet 0/1 on a CISCO switch or router, run: # enable # configure terminal (config)# interface FastEthernet 0/1 (config-subif)# no shutdown (config-subif)# end # write