Contributing

How do I reset my Oki toner?

How do I reset my Oki toner?

Answer

1. Press Menu = printer displays “Paper Menu”
2. Press Next 4x = printer displays “System Menu”
3. Press Select 1x = printer displays “Factory Defaults”
4. Press Next 7x = printer displays “Reset Toner Life”
5. Press Select 1x = printer displays “Resetting Toner Page Count”
6. Press Ready.

How do I fix Oki B4600 paper jam?

How to Resolve Paper Jams in an Oki B4600 Printer

1. Pull the paper tray out of the printer.
2. Take any wrinkled or crumpled paper out of the paper tray.
3. Check the feed area on the bottom of the printer and pull out any paper caught in the feed area.
4. Place the paper tray back in the printer.

How do you reset toner?

A simple reset is open cover the printer and turn off the printer. Remove all the Brother toner cartridges out of the printer. Wipe and check the chips to see if they are all correct on the toner and haven’t been dislodged. Give the printer a quick wipe and clean with a lint free or dust free cloth.

How do I reset my Oki password?

ANSWER

1. Press [Device Settings] on the touch panel.
2. Press or. several times, and then press [Admin Setup].
3. Input the admin name and password, and press [OK].
4. Press or.
5. Press or.
6. Input the new admin password, and press [OK].
7. Input the password again.
8. Press [OK].

How do you fix a paper jam without paper?

Sometimes a paper jam error persists even though there is no jammed paper (false paper jam). Reset the printer, which might clear a false paper jam error, and then try to print again. With the printer turned on, disconnect the power cord from the printer. Unplug the power cord from the power source.

Why does my Oki printer keep jamming?

If your paper keeps jamming, bits of paper are probably stuck in the paper path. Turn off the printer, and use the platen knob to back the paper out of the printer. Open the access cover and the rear cover (1). paper up and out so you can remove them — then back it out again.

Why is my new toner not working?

Why is my new ink or toner cartridge not printing? First, ensure that all tabs, strips, protective papers and films have been removed from the cartridge, and then reinstall. If this does not resolve the issue, it may be caused by how the cartridge was stored prior to use.

Why does my printer keep saying replace toner?

The message “Replace Toner” is intended to alert you that the toner cartridge has reached the end of its expected life. When replacing the toner cartridge, you MUST install a brand new, unused genuine Brother toner cartridge in order to reset the “Replace Toner” status.

How do I reset my OKI b412 printer?

ANSWER

1. Run the printer menu setup tool. Select [Start] – [All Programs] ([All Programs] except on Windows XP/Server 2003])-[Okidata]- [OKI B410 Printer Menu Setup Tool]-[Printer Menu Setup Tool].
2. Click [+] to the left of [Maintenance Menu]. Click [MENU RESET], and then click the [EXECUTE] button. Note.

How do I reset my Oki c332?

ANSWER

1. Press the. button a few times to display [MAINTENANCE MENU].
2. Press the “OK” button.
3. Confirm that [MENU RESET/EXECUTE] is displayed. If other than [MENU RESET/EXECUTE] is displayed, press the or. button a few times to display [MENU RESET/EXECUTE].
4. Press the “OK” button.

How do I fix my selphy paper jam?

Follow these steps if paper jams in your SELPHY ES1.

1. Turn the printer OFF and unplug the machine.
2. Remove the cover below the paper-handling slot. (To do so, lay the printer down, place your fingers on the sides of the cover, and lift up).
3. Slowly remove the paper to avoid tears, then re-attach the cover.

Do you need to reset the toner counter on the Okidata b4600?

After replacing the toner cartridge in your Okidata B4600, you’ll need to reset the counter to ensure that the system keeps track of the level. On some printers this is done automatically. But in the B4600 the user manually completes the reset.

How to reset the image drum on a b4400 printer?

B4400/4500/4550/4600 Image Drum Replacement/Reset Instructions Please use the following instructions when replacing the image drum in a B4400, 4500, 4550, or 4600 page printer. Note that the drum counter needs to be reset after replacement of the consumable drum, step 11 in the attached instruction sheet.

How does Oki Data reset the printer counter?

For the B4400 printer, resetting the counter is done through the software status monitor, for the other models, directly from the operator panel. Oki Data has taken care to insure that the information is complete, accurate and up-to-date.

Why is the Toner Low on my Oki?

Wipe the LED head with a soft tissue paper. The toner is low. If “Toner Low” or “Toner Empty. Replace with new Toner Cartridge.” appears, replace the toner cartridge. The lightproof film of the image drum is dirty. Wipe the lightproof film with a soft tissue paper. The image drum is not installed properly.