How do you use Plascon paint?
How do you use Plascon paint?
All surfaces must be clean and thoroughly dry before you begin painting. Using a brush or roller, prime the surface with Plascon Plaster Primer and apply Plascon Multiseal. Build the sealant up to a thickness of 1mm (use three coats, allowing each to dry for four hours). Complete with two coats of topcoat.
How long does plascon take to dry?
The new plaster needs to cure for a minimum of 28 days before any paint is applied. Prime the walls with one coat of Plascon Plaster Primer and allow it to dry for 16 hours. Follow this by applying two coats of Plascon Wall & All or Plascon Micatex, allowing it to dry for two hours between coats.
How long does Micatex take to dry?
To apply Plascon Micatex you can use a paintbrush for detail areas and edges, and a medium- to heavy-pile roller for flat surfaces. Where two coats are necessary, allow sufficient drying times between coats – normally between 1 and 2 hours.
How long does plascon roof paint take to dry?
Allow at least 1hour drying time between coats of NUROOF.
Is plascon true Colour paint washable?
Plascon True Colour Brilliant Sheen is superior quality washable and durable acrylic PVA suitable for both interior and exterior surfaces.
How long does plascon Velvaglo take to dry?
Finally apply two coats of Velvaglo with a drying time of 16 to 24 hours in between coats. Please note that this time of year drying times tend to be slower due to the moisture levels in the air. Velvaglo is suitable for kitchen and bathroom walls, and wooden and metal surfaces.
Is Polvin paint washable?
The PLASCON POLVIN is an amazing acrylic matt finish for your home or business that is completely washable for both interior and exterior use.
Who owns Plascon paints?
Plascon was officially formed in 1949 and renamed Kansai Plascon in 2012 after Kansai Paints bought the business from Freeworld Coatings the previous year.
Which paint is best for interior walls?
Emulsion paint Emulsion paints are water-based, making them almost odour-less and the most preferred choice for interior wall paint colours. The paint is quick drying and has a very low level of VOCs (volatile organic compounds).
Can you spray plascon Velvaglo?
Used as a decorative and protective finish on interior and exterior, primed woodwork, plaster or metal. The Plascon 7 year guarantee will only apply if VELVAGLO is used on interior surfaces. Substrate Suitably prepared and primed surfaces. Method Brush, roller or spray.
What is Polvin paint used for?
Plascon’s Super Acrylic Polvin is an acrylic emulsion used for interior and exterior on various types of building boards, cement plaster, concrete and porous brickwork. Super Washable Sheen paint is a washable emulsion paint. It can be used for both interior and exterior surfaces and is of superior quality.
How to change the colour of Plascon paint?
DRAG THE WHEEL LEFT OR RIGHT TO CHANGE HUE ⟶ Sandstone Skin O7-A1-4 2. CLICK ON YOUR COLOUR Colours on screen may vary from the actual paint, use Plascon tester pots for colour accuracy. 3. View Colour Details
What kind of paint does Plascon roofing use?
Plascon True Colour Textured is a sand textured paint that bridges hairline cracks and hides plaster imperfections. Available in a range of trendy, tried and test colours Plascon True Colour Roof is a quality water-based acrylic paint suitable for all cementitious, fibre cement and galvanized roofs.
What are the features of Plascon Protech paints?
These features address critical factors in the total applied cost, such as the saving of labour time.
What kind of paint is Plascon super acrylic?
Plascon Super Acrylic Polvin is a superior quality paint with excellent hiding and impeccable whiteness. It applies effortlessly and dries to a flawless, smooth matt finish that’s easy to clean Plascon Micatex is a premium fine textured exterior paint.