How much does it cost to run a water jet cutter?
How much does it cost to run a water jet cutter?
While there are several factors that can affect the hourly cost of running a waterjet, on average, it can cost anywhere between $20/hr – $40/hr to run a waterjet with a single abrasive cutting head at 60,000 psi (does not include labor or capital repayment).
How much water does a waterjet cutter use?
Waterjets use between one half and five gallons (2 to 19 liters) of water per minute when cutting. Some of that water is used to cut and some of it is used to cool the pump.
How much is a water jet table?
Traditional waterjets cost upwards of $100,000 and are too large and messy to fit in most workshops. WAZER costs $7,500.
How fast is a water jet cutter?
around 2,500 ft/s
This beam of water is ejected from the nozzle, cutting through the material by spraying it with the jet of speed on the order of Mach 3, around 2,500 ft/s (760 m/s). The process is the same for abrasive waterjets until the water reaches the nozzle.
Why are water jets so expensive?
Water jet cutting: This tends to be pricier due to component wear and consumables. In addition to a water pump that needs periodic maintenance, you’ll need nozzles, seals, cutting water, cooling water, and an abrasive medium to run with the water in the machine.
How much does a water jet cost?
Waterjet and Laser equipment cost typically starts at around $100,000+, making these systems by far the most expensive to purchase.
How thick can a water jet cutter cut?
How thick can an abrasive waterjet cut? The high-level answer is that abrasive waterjets can cut through 12 inches of most materials. Many of our customers report cutting material even thicker than that. Most abrasive waterjet cutting, however, is done in material that is 3 inches thick or less.
How much does a flow Mach 500 cost?
Mach 500 Waterjet Cutting Machine 2M X 2M for Heavy Cutting Applications : $299,000 – 388,700 AUD ($328,900 – 427,570 Inc.
How much does it cost to cut a waterjet?
Depending on many factors, waterjet cutting could cost as low as $19.86/hr
What are the benefits of a water jet cutting machine?
The benefits of water jet cutting have been well documented and are well known – no tooling costs, versatile, ideal for full production use as well as rapid response short runs and prototyping, no secondary finishing, no heat affected zones and no noxious fumes.
Do you need regular maintenance on a waterjet?
As with any piece of industrial equipment, waterjets require regular maintenance to keep them at peak performance. Below are a few consumables – included in the above estimate – you’re likely to encounter when owning a waterjet. Okay, So, How much does a waterjet cutting system cost?
What kind of material can a waterjet cut through?
Waterjet can cut through Carbon Steel, Stainless Steel, Aluminum, Titanium, Copper, even glass. Different materials have different levels of strength. You can handle most glass with 60k PSI and regular fine abrasive.
https://www.youtube.com/watch?v=cknAqabSR3c