How wide is a Sportster front end?
How wide is a Sportster front end?
33.325mm
Early Sportsters had a 33.4mm (actually 1.312″ diameter, which converts to 33.325mm) front end, which are easy to identify by their drum brake.
Can you put a Softail front end on a Sportster?
Dave63 said: It’ll work, but you have to deal with the issue of the fork stop. Some softails have external, where as some have internal.
What size forks on Sportster?
39mm
39mm Diameter Motorcycle Fork Tubes for Harley-Davidson Sportster.
How wide is a wide glide front end?
49mm on the newer tubes and 41mm on the older ones.
What is stock length for Harley front ends?
Measurement is from “The top of the bottom tree to the center of the axle”, and their “stock” front end is 23″.
How do Harley forks work?
Harley forks generally consist of upper tubes that mount to the triple trees and lower tubes that slide over them and connect to each other via the front wheel. Generally very long, the main spring holds the front end up and compresses as the front wheel comes into contact with a bump.
Will Dyna Forks fit a Sportster?
It will fit 39 mm, only difference is the adjustable forks and dual disks brakes. Just add $370 for the dual brakes, and another wheel and you will be all set.
How do you measure fork on a Harley?
FORK LENGTH: The distance between the top of the fork tubes to the centerline of the axle. DIAMETER: The diameter of the front tire.
How much does a Dyna Wide Glide weight?
| Harley-Davidson Dyna Wide Glide Dimensions, Aerodynamics and weight | |
|---|---|
| Rear Brakes Dimensions – Disc Dimensions | – |
| Curb Weight (including fluids) | 309.8 kg (683.0 pounds) |
| Dry Weight | 294.8 kg (650.0 pounds) |
| Front Percentage of Weight | – |
How are motorcycle front forks measured?
Registered. Forks are measured where they clamp into the top triple tree.
What does less fork oil do?
Adding oil to your forks reduces the air volume. Since the compression of the airspace is gradual, lessening the airspace will be felt by the rider from the middle of the fork’s stroke to the point of bottoming.
Can a Harley Sportster be converted to Wide Glide?
Harley Sportsters had 35mm tubes up until 1988 and then upgraded to 39mm tubes. If you’re considering converting to a Wide Glide front end, there are no factory triple trees that will fit the 7/8″ stem. The best and easiest way is to buy an aftermarket kit.
Which is the best Harley Davidson Wide Glide kit?
Whether you go with a traditional springer Wide Glide front end conversion kit or you prefer a Harley Wide Glide front end with shock absorbers, J&P is your source for the perfect Harley-Davidson Wide Glide front end.
What kind of bike has Wide Glide front end?
In addition to the FXWG models, Wide Glide front ends were also fitted to 1980-1983 FWDG Dyna models, and several Softail models from 1993-2003. Since all Big-Twin Harley frames from 1949 and up have the same 1.00″ neck diameter, the Wide Glide conversion is a popular front end swap. Early Wide Glide models had dual disc front brakes.
Is the Wide Glide front end made in 1980?
The ’80’ tells it is a 1980 year beginning manufacture part, but remember that Harley puts production numbers on a lot of parts that aren’t actual part numbers. I installed a Wide Glide front end on my Harley Servi-car .