What are the dimensions of KERDI-BOARD?
What are the dimensions of KERDI-BOARD?
With the available panel thicknesses of 3/16″, 3/8″, 1/2″, 5/8″, 3/4″, 1″, 1-1/2″, and 2″ (5, 9, 12.5, 15, 19, 25, 38, and 50 mm), KERDI-BOARD allows the installer to prepare and create a broad range of substrates and building elements for the installation of ceramic and natural stone tile that are flat, level, plumb.
What are the dimensions of a Schluter curb?
The curb can be used in conjunction with KERDI-SHOWER-T/-TS/-TT shower trays or mortar bases and is available in three sizes, 38″ x 6″ x 4-1/2″ (97 x 15 x 11.5 cm), 48″ x 6″ x 4-1/2″ (122 x 15 x 11.5 cm) and 60” x 6” x 4-1/2” (152 cm x 15 cm x 11.5 cm).
What size is the Kerdi drain?
KERDI-DRAIN ADAPTOR KITS, available in 5 1/4″ (133 mm) and 7 1/2″ (191 mm) diameter sizes, are used to convert traditional clamping ring drains to integrated bonding flange drains when removal of the clamping ring drain is not practical (e.g. when they are set in concrete slabs).
Does Kerdi board go over drywall?
Yes! In fact, it’s advised to use this product on drywall in your bathroom before laying tile and other materials. Installing Kerdi on your drywall provides protection against rot, mildew and mold growth. When Kerdi is installed properly, it can serve as an incredibly effective waterproofing layer.
Is Kerdi board waterproof all the way through?
KERDI-BOARD by Schluter is one of the best ways to waterproof a shower. A lot of folks like using cement board but it’s heavy and requires a waterproofing membrane over it. Furthermore, if you’r working in an older home KERDI-BOARD fits better than cement board in odd spaces.
How far from the wall should a Schluter drain be?
approximately 2 1/8″ o.c.
It is installed directly against the wall, so that the channel body support is in contact with the wall. The drain outlet is approximately 2 1/8″ o.c. from the edge of the wall board.
Can you use any drain with Schluter?
Can I use another manufacturer’s drain with your Schluter®-Shower System? The Schluter®-Shower System 10-Year Limited Warranty is void if other drains are used.
Can you screw into Kerdi curb?
2 Answers. The kerdi curb won’t hold your screws. You can try putting a screw on a piece of scrap and you should be able to pull the screw out by hand. It is designed to be used at the bottom of the shower door just to hold the tiles and good enough for a person to step on it.
Can you use any drain with Kerdi?
Can I use another manufacturer’s drain with your Schluter®-Shower System? The Schluter®-KERDI-DRAIN and Schluter®-KERDI-LINE drains are specifically designed to integrate with the Schluter®-Shower System. The Schluter®-Shower System 10-Year Limited Warranty is void if other drains are used.
How does Kerdi drain work?
Schluter®-KERDI-DRAIN is a floor drain specifically designed to allow connections to Schluter-KERDI or other load bearing bonded waterproof membranes. The membrane is adhered to the large integrated bonding flange to form a waterproof connection at the top of the drain assembly.
What kind of drain is Schluter Kerdi line?
Schluter ® -KERDI-LINE. The Schluter ® -KERDI-LINE is a low profile linear floor drain specifically designed for bonded waterproofing assemblies. KERDI-LINE can be installed adjacent to walls or at intermediate locations in showers, wet rooms, and other applications that require waterproofing and drainage.
How big is a Schluter Kerdi shower tray?
A. Channel body with Schluter®-KERDI waterproofing collar B. Channel support C. No-hub coupling A B C • Sloped shower tray • Available for wall or intermediate drain placement in two sizes: 39″ x 39″ or 55″ x 55″ • Schluter®-KERDI waterproofing membrane laminated to the surface • Shower profiles (optional)
Can a shower base be sloped to the Kerdi line?
However, shower bases can be sloped on a single plane to the KERDI-LINE linear drain, which enables the use of attractive large-format tiles. KERDI-LINE can be installed adjacent to walls or at intermediate locations, further increasing design options.
How does the Schluter Kerdi waterproofing membrane work?
The Schluter®-KERDI bonded waterproofing membrane and vapor retarder provides superior moisture management as it does not permit moisture to penetrate into the mortar base or solid backing on walls, allowing the assembly to dry completely between uses, thus eliminating leaks and mold growth within the system. Prefabricated Shower Components
