What causes an agitator to stop working?
What causes an agitator to stop working?
Here are some of the main reasons your washing machine agitator not spinning: An obstacle jammed in the agitator. A broken lid switch. A loose or broken drive belt.
How do you reset the agitator on a washing machine?
Motor Reset Procedure:
- Unplug the washer for 1 minute from the electrical outlet.
- Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.
- The motor has now been reset and is ready for you to start a cycle.
Why won’t my washer spin or agitate?
Common solutions for: My Washer Won’t Spin or Agitate. Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it. If the lid switch assembly fails, the washer will not spin.
What causes a Maytag washer not to spin?
One of the most common reasons for a Maytag top load washer not spinning is an incorrect wash cycle or spin setting. GENTLE, HANDWASH, or DELICATE settings utilize slower spin speeds for more fragile fabrics. Some model washers also allow you to vary the spin speed, making it slower or more rapid, for different loads.
Why is my spin cycle not working?
An unbalanced load of laundry is one of the most common causes of an inadequate spin cycle. Sometimes clothing can settle on one side of the drum, throwing off the motion of the washing machine. If you suspect a distribution problem, try rearranging your clumped-up wet laundry and running the spin cycle again.
Why is my washing machine not turning on?
Make sure the machine is tightly plugged in. Next, check for a tripped circuit breaker. Reset the breaker and try to start the washer. If neither is at fault, you may have a damaged power cord.
What is the purpose of the agitators in a washing machine?
An agitator is a spindle-piece found in the middle of the drum in top-load washing machines. The agitator comes in many different designs and styles, but they are all meant to increase clothes turnover within the washing machine.
Why is my washing machine not agitating?
Cycle Selector Switch – The cycle selector switch controls the speed of the motor and if it goes bad it can stop the motor from operating. Drive Belt – If the belt falls off or becomes worn the transmission will not turn and the machine will not agitate. Drive Motor – This motor turns the agitator and drum to wash your clothing.
What makes a washing machine agitate?
Washing machines, including GE models, agitate back and forth, after filling with water and detergent, to clean the clothes inside the tub. This agitation mixes the water and soap , moving it through the clothes to remove dirt and soil; then the water and soap are drained and the clothes rinsed.
Why is my Whirlpool washing machine not agitating?
If your washer fills with water but doesn’t agitate, the problem is likely to be a faulty lid switch, a broken belt, or a problem with the motor. (Note: Direct-drive washing machines do not have belts.)