Other

What diameter is a 185mm2 cable?

What diameter is a 185mm2 cable?

CABLE WEIGHT & OVERALL DIMENSIONS

Nominal Overall Diameter mm Approx Weight Kg/100mt
95mm2 17.2 101
120mm2 19.6 123
150mm2 21.3 152
185mm2 23.5 189

How many amps can 10mm cable take?

A 10mm cable can carry between 40 and 70 amps of current.

Can 6mm take 40A?

40A is too high for 6mm, should be 32A. Also the length of the cable run has a big impact on whether 6mm is a big enough cable…..! Its generally ok but can struggle for long runs.

How much current can 1.5 mm2 cable carry?

Depending on the installation method used, the 1.5mm cable has a maximum rated capacity of between 14 and 20 amps, so its right on the limit.

What is the size of 11kv cable?

Technical Specification

Cable type Cu/XLPE/SC/SWA/PVC
Overall diameter (Approx.) (mm) 74
Permissible operating temperature of conductor (°C) 90
Permissible temp.in emergency overload (°C) 130
Permissible short-circuit temperature up to 5 sec. (°C) 250

What are the sizes of Armoured cable?

3 Core Armoured SWA – 1.5mm – 2.5mm – 4mm – 6mm – 10mm – 16mm – 25mm. Branches stock lengths up to 1,000 mtrs in some sizes. Application: Designed for use in mains supply electricity. These cables are provided with mechanical protection are therefore suitable for external use and direct burial.

What power can a 6mm cable take?

2 Answers from MyBuilder Electricians 6mm twin and earth cable (which this almost certainly is) can be backed up by a maximum of a 32a MCB, even lower if other factors are involved. You’ll need that 10mm cable and a 40a MCB unfortunately as your shower is going to draw over 32a.

What is 10mm cable good for?

10mm earth cable is suitable for fixed wiring of electrical equipment, lighting and household appliances Usually used for grounding wires.

Is 6mm cable OK for 9.5 KW shower?

Electric Shower Power Ratings and Power Cable Information Fuses and switches should be rated at 32 amps. Showers up to 9kw may carry a 6mm cable as long as the shower unit is within 18 meters of the fuseboard. Showers up to 12.5kw should carry a 10mm cable to units within 35 metres of the fuseboard.

How much load can a 6mm cable take?

The regulations allow for a 145% increase in current carrying capacity for one hour so using a 6mm for a maximmum load od 32A with a 32A MCB is acceptable. It is not possible to protect a 6mm cable with a maximum load of over 50A with a 32A MCB.

Is 1.5 mm wire load capacity?

1.5 mm is halfway between 14 guage and 15 guage which handle 5.87 and 4.66 Amps respectively. 2.5 mm is pretty close to 10 guage wire which can handle 14.8 Amps.

Is 2.5 mm cable OK for sockets?

2.5mm Twin and Earth is commonly used as indoor domestic cable. The most common use for this type of cable is for circuits that provide power to sockets. It is made up of two cores and an earth core which must be covered with the identifying green and yellow sleeve when installed.

Which is 3 core 4 core 185mm cable?

Usually, the 3 core 4 core 185mm2 cable has armoured and non-armoured or LSZF, the armoured and LSZF 3 core 4 core 185mm cable price is more expensive than other common cable. So,you need according to difference project requirements and laying environment to select the size.

What kind of conductor is 3 core 185mm2?

But, from difference sides, Usually, the conductor of 3 core 4 core 185mm2 cable is copper or tinned copper or aluminum. and the insulation is PVC (polyvinyl chloride) rated at 75℃,many color optional, or XLPE 90℃. Especially, the armoured 3 core 185mm xlpe cable is widely application in some big programs.

Where to get 3 core 185mm XLPE cable?

Get the 3 core 185mm xlpe cable from Huadong Cable factory. Firstly, you send the 4 core 3 core 185mm xlpe cable parameter date to them, Then require them free offer you the 3 core 4 core 185mm cable price for you. Secondly, inspecting them whether has customize ability. So, this is the best method to avoid the middle-men.