What direction do I point my satellite?
What direction do I point my satellite?
The horizontal alignment refers to the position of the satellite emitting the signal. Therefore, your dish needs to point either to the east or west, in the direction where you wish to receive the signal.
Where is Optus C1 satellite?
The Optus C1 satellite is located at 156 degrees East. This doesn’t mean that you point your dish towards 156E on a compass! It means that the satellite is located 156 degrees East of 0 longitude.
What type of orbit does the Optus D1 occupy?
The two satellites of the Optus-D series will be based on Orbital’s Star-2 platform and will carry 24 Ku-band transponders, with 8 back-up channels also available, to provide fixed communications and direct television broadcasting services to Australia and New Zealand….Optus D1.
| Nation: | Australia |
|---|---|
| Orbit: | GEO |
How do I change the elevation on my satellite dish?
If you set the front face of your dish vertical the beam elevation will be the same as the offset angle. You can use a string on a weight and put the string at the top front edge. The string should just touch at the bottom. Alternatively you might apply an inclinometer to the front side edge of the dish.
What satellite does Optus use?
Optus launched in June the world’s largest and most complex hybrid commercial and military communications satellite, Optus C1, together with the Australian Defence Force. Optus launched its 7th satellite, Optus D1. Optus launched its 8th satellite, Optus D2.
How to turn dish to point Optus D1 New Zealand?
Insert Satellite Finder in cable between receiver and LNB, note connection direction on the rear of the meter. 7. Adjust control clockwise until tone sounds then reduce for no sound. Turn dish westwards on mount until tone increases as it picks up signal from satellite. The meter reading should go off the scale when you “hit” a satellite.
Where is Optus at 156 deg east longitude?
Optus at 156 deg east longitude is just an example. Put your cursor at your location and drag the map. The map display will move so that the selected point is in the centre.
How can I find out where my satellite dish is pointing?
Put your cursor at your location and drag the map. The map display will move so that the selected point is in the centre. The latitude and longitude of the centre of the map is then shown below the map, together with your satellite dish pointing azimuth, elevation and skew (feed or LNB rotation or polarisation) angles.
How to set up a vast satellite dish?
Dish Alignment Calculator with Google Map. This is a very handy tool to assist in aligning your dish for reception of VAST satellite TV from the Optus C1 satellite. Simply enter your exact location and the alignment calculator will tell you the exact alignment details to assist you in positioning your satellite dish.