Q&A

What does 55 mean on the motherboard?

What does 55 mean on the motherboard?

Code 55 is “memory not installed”. If you know your memory is good, it is most likely the motherboard at fault.

How do I fix Error Code 2?

1. Disconnect the drivers one by one. As already described, the A2 PC error is related to the bootable devices on your computer.
2. Reset or update CMOS / BIOS. Another way in which the A2 boot problem can be fixed is by updating BIOS.
3. Update your drivers.
4. Solution 4 – Particular case: SATA devices.

How do I fix error code 55?

Code 55 maybe RAM The Memory could not be detected. Please re-install the memory and CPU. If the problem still exists, please install only one memory module or try using other memory modules.

How do I fix Error 55 on my motherboard?

Error 55 on Asus motherboards is related to RAM. Check that you RAM is correctly seated, try one stick at the time. Make sure your CPU was installed correctly and there isn’t any damage done to it.

What is an error code 2?

Windows error 2 is an error that usually occurs when you are attempting to install a language pack on your system. There are two circumstances when you can receive this error: the error could appear after you cancel a language pack update or if the update goes wrong.

How do I fix error code 53?

Fix: Steam Error Code 53

1. Solution 1: For AMD Chipset Users.
2. Solution 2: Reformatting Your Drive Into a Different File System.
3. Solution 3: Disable McAfee Real-Time Scanning.
4. Solution 4: Add the Game You Are Playing to Exceptions on Your Antivirus Tool.

How do I clear the CMOS battery?

Steps to clear CMOS using the battery method

1. Turn off all peripheral devices connected to the computer.
2. Disconnect the power cord from the AC power source.
3. Remove the computer cover.
4. Find the battery on the board.
5. Remove the battery:
6. Wait 1–5 minutes, then reconnect the battery.
7. Put the computer cover back on.

What do I do if my hard drive short DST check failed?

5 Steps You Need To Do When Your Short DST Failed

1. Check IDE or SATA cables.
2. Check and repair the bad sectors.
3. Scan and fix common disk drive DST fault errors.
4. Restore your system to an earlier point.
5. Swap your disk drive.

What causes short DST failure?

When a hard disk short DST check fails, it usually means your hard drive has encountered a problem with one of the tested components. Some manufacturers, such as HP and Dell, build automatic DST software into their products, and the short DST check runs every time you boot up your computer.

What is an error code 2 on Facebook?

It appears that this problem affects all users who are trying to access Facebook from a web browser, or who are using the Facebook app. This problem may occur when you have network connection problems. More specifically, it is possible that your iPhone or iPad could not communicate with Facebook’s servers.

What is the ASUS motherboard code of 55?

Code 55 maybe RAM. You can search the 55 code with this tool: http://www.asusqcodes.com/index.php?inputCode=55. for code 55 I found: The Memory could not be detected. Please re-install the memory and CPU. If the problem still exists, please install only one memory module or try using other memory modules. Check this site for more comments.

Why is there an error code 55 on my computer?

The error 55 is memory related….try reseating the memory first to ensure its snug…..and try posting memory @ default 2133mhz…..take that route first…before reseating the chip. I have been getting a blank screen and Q-code 55 on every boot of my computer, The Q-LED Error always says “CC” and a few seconds later it says”55″.

What’s the Q-code on my Asus Laptop?

Note: If you are a registered ASUS Member already, please use your ASUS Member’s ID (Email) and password to proceed the login. Email this Page… Subscribe to this Thread… I have been getting a blank screen and Q-code 55 on every boot of my computer, The Q-LED Error always says “CC” and a few seconds later it says”55″.

What does the Q-code 55 on my computer mean?

I have been getting a blank screen and Q-code 55 on every boot of my computer, The Q-LED Error always says “CC” and a few seconds later it says”55″. “CC” means clear cmos. So clear CMOS and try again.