What is airFiber Ubiquiti?
What is airFiber Ubiquiti?
Introducing airFiber®, a truly revolutionary Point-to-Point wireless platform from Ubiquiti. Housed in a compact, highly efficient form factor, airFiber delivers amazing wireless gigabit+ performance, low latency, and long range. airFiber® is normally purchased in pairs to form a single link.
Does Ubiquiti airFiber need line of sight?
The airFiber® AF‑5/AF‑5U, referred to as the AF‑5 in this Design Guide, features unique functionality that requires you to be cognizant of the installation environment. For best performance, you must install the AF‑5 as high up as possible, with a line of sight free from obstructions.
How airFiber works?
airFiber can transmit data synchronously without any wait time. Based on the ranging algorithm built into the air protocol, the airFiber radios use patent-pending HDD technology to calculate the propagation delay and know when each radio can transmit and receive, so they send packets in precise synchronization.
How do I set up airFiber?
Connect Power over Ethernet to the Data port, and connect an Ethernet cable between your computer and the Management port. Configure the device settings in the airFiber Configuration Interface. Once configuration is complete, disconnect the cables to move the airFiber radios. Pre-assemble the mounting hardware.
How can I get BSNL AirFiber?
How to apply for Bharat Air Fibre?
- Go to bookmyfiber.bsnl.co.in .
- Select BHARAT AIRFIBRE under “SELECT SERVICE.”
- Select your Circle.
- Enter your area Pin-Code.
- Then your Name, 10 digit mobile number, Valid Email ID.
- You’ll receive an OTP on the entered number.
- Enter the OTP and click on Next.
What is Bharat Airfibre?
The AirFibre plans work on radio-based solutions and are wireless. BSNL now introduced two new AirFiber plans that will give a maximum of 80Mbps download speed and One Free Static IP address. The Airfibre Ultra and Air Fibre Ultra Plus plans also give unlimited calls and are priced at Rs 2995 and Rs 6995 respectively.
Does NanoBeam need line of sight?
Answer: These are primarily designed for point-to-point(PtP) and point-to-multipoint(PtMP) applications with a clear line-of-sight. Two NanoBeam units can be used for PtP network bridges (virtual CAT5 cable). Given their narrow beamwidth antenna design, NanoBeam units are only suitable for one end of a PtMP connection.
How reliable is AirFiber?
Resilient and reliable: AirFiber is impervious to storms that are capable of knocking out cable and phone line connections. Even during the fiercest rainstorms, you can typically expect performance to remain at 90-95%.
How do I connect airFiber 5XHD?
Connect the airFiber PoE Adapter to the Data port, and connect your computer to the MGMT port. Configure the AF-5XHD. Recommended: Install the IP67 Upgrade Kit (included) to prevent intrusion by water, dust, and insects. Install a ground wire and mount the AF-5XHD on an airFiber X or RocketDish antenna.
How do you align airFiber 5x?
Open up the alignment tool in the AirOS WebUI and have one installer slowly adjust the azimuth on one antenna until you see the signal get better, then worse again. Once you are losing signal, start backing up the azimuth until you reach the peak signal. Repeat step 6 for the elevation.
How much does AirFiber cost?
The price for the AirFibre Value Plan is 899 INR for the one-month subscription. Whereas the price for the 12-months subscription is 10,788 INR. With the annual plan, BSNL offers an additional month of free service which means you will get 12+1 months of subscription on the yearly plan.
What kind of wireless technology does Ubiquiti use?
Revolutionary Wireless Technology: Introducing airFiber, a truly revolutionary 24 GHz Point-to-Point radio from Ubiquiti Networks.
How is Ubiquiti used in airfiber processing engine?
Ubiquiti’s proprietary protocol enables time-synchronous packet transmission, resulting in the lowest possible, sub-millisecond latency – vital for backhaul performance. processing engine, powers airFiber ® to process 2+ million packets per second.
How big is the range of the airfiber?
Housed in a compact, highly efficient form factor, airFiber delivers revolutionary performance of 1.4+ Gbps, aggregate throughput and 13+ km in range. airFiber ushers in a new era in price disruptive, carrier-class backhaul technology. Supports 24 GHz frequencies.
Is the Ubiquiti AF24 airfiber AF-24 GHz radio 1.4?
The 24ghz seems to work well at 3 to 5 miles. I would not push it past that. Needed the 24ghz because too much noise in urban setting. Rated at 13 Kilometers, it wouldn’t make the shot. Had to go back to a 5ghz temporarily, but throughput is diminished for noise. The 24ghz seems to work well at 3 to 5 miles.